Experiencing issues with your Harley Davidson key fob can be frustrating, potentially leaving you unable to start your motorcycle or disarm the security system. Understanding how to program or reset your key fob is essential for every Harley-Davidson owner. This guide provides step-by-step instructions for programming your Harley Davidson key fob, covering both the Turn Signal Security Module (TSSM) and the Hands-Free Security Module (HFSM) systems. Whether you’re looking to reset your PIN or understand how to arm and disarm your system, this article will equip you with the knowledge you need.
Understanding Your Harley Davidson Security System: TSSM
The Turn Signal Security Module (TSSM) is identified by its key fob with a rubber button. If your Harley Davidson uses this system, follow these steps to reset your PIN code:
- Kill Switch: Ensure your kill switch is in the “OFF” position.
- Ignition Cycle: Rapidly turn the ignition switch “ON” and “OFF” twice, ending in the “ON” position. This involves a total of five actions: ON, OFF, ON, OFF, ON.
- Left Turn Signal Activation: Immediately after the ignition cycle, quickly press and release the left turn signal switch twice (press, release, press, release).
- Fob Button Press: Press and release the button on your key fob firmly.
- Odometer PIN Display: Your current 5-digit PIN should now be visible on the odometer display.
- PIN Code Adjustment: Use the left turn signal switch to scroll through the numbers and select your desired first digit for the new PIN code. Each press of the left signal will increment the number.
- Move to Next Digit: Once you have selected the first digit, press the fob button twice to move to the next digit in the PIN sequence.
- Repeat and Finalize: Repeat steps 6 and 7 to set the remaining four digits of your new 5-digit PIN.
- Confirmation: After setting your desired 5-digit PIN, press and release the right turn signal switch and turn the ignition switch to the “OFF” position to save the new PIN.
(Remember to perform steps 2 to 4 swiftly, one after the other for successful programming).
Arming and Disarming Your TSSM System
To arm and disarm your Harley Davidson with the TSSM system, using a sample PIN of 25522, follow these steps:
- Accessory Mode: Turn your ignition switch to the “Accessory” position.
- Simultaneous Signal Press: Press and hold both the left and right turn signal switches simultaneously. The red key light on your speedometer will flash rapidly, indicating successful entry into the arm/disarm sequence.
- Enter PIN Digits: Now, enter your PIN digit by digit using the turn signals. For example, for the first digit ‘2’:
- Press and release the left turn signal twice.
- Press and release the right turn signal once to confirm the digit and move to the next.
- Continue PIN Entry: Repeat step 3 for each digit of your PIN (e.g., for ‘5’: Left x5, Right x1; for ‘5’: Left x5, Right x1; for ‘2’: Left x2, Right x1; for ‘2’: Left x2, Right x1).
- System Status: If the PIN is entered correctly, the rapid flashing of the red key light on the speedometer will stop. This indicates that the security system is now disarmed.
(Perform steps 2 to 7 quickly in succession for optimal results).
Programming Your Hands-Free Security Module (HFSM)
The Hands-Free Security Module (HFSM) key fob is distinguished by its solid plastic construction. Use these instructions to program the HFSM system:
- Proximity: Ensure you are near your motorcycle with the key fob present.
- Kill Switch Off: Set the kill switch to the “OFF” position.
- Rapid Ignition Cycle: Quickly turn the ignition switch “ON” and “OFF” twice, ending in the “ON” position (ON, OFF, ON, OFF, ON).
- Left Turn Signal Activation: Immediately press and release the left turn signal switch twice.
- Right Turn Signal Activation: Quickly follow by pressing and releasing the right turn signal switch once.
- Odometer PIN Display: The current PIN code should appear on your odometer.
- PIN Code Adjustment: Use the left turn signal switch to change the displayed number to your desired digit.
- Move to Next Digit: Press the right turn signal switch to proceed to the next digit. Repeat step 7 to set all five digits of your new PIN.
- Confirmation: Once your 5-digit PIN is set, switch the ignition to the “OFF” position to save it.
(Execute steps 3 to 5 swiftly for successful programming).
Arming and Disarming HFSM System
Arming and disarming the HFSM system follows a similar process to the TSSM system. Begin by turning the ignition switch to the “ON” position and then proceed with the arming/disarming steps outlined for the TSSM system, starting from step 2 under “Arming and Disarming Your TSSM System.”
When to Seek Professional Harley Davidson Key Fob Programming Assistance
While these steps cover the basic programming procedures, certain situations may require professional assistance. If you encounter difficulties or prefer expert help, contacting a certified Harley-Davidson dealership is recommended.
Redline Harley Davidson, as mentioned in the original article, or your local authorized dealership, possesses the specialized software and hardware necessary for advanced diagnostics and key fob programming. Dealership professionals can assist with:
- New Key Fob Programming: If you need a replacement key fob or an additional fob.
- PIN Code Retrieval or Reset: In cases where you have lost or forgotten your PIN and cannot reset it using the outlined methods.
- Security System Malfunctions: For more complex issues with your Harley Davidson security system.
For any concerns regarding your Harley-Davidson key fob, security system, or for professional programming services, reaching out to a Harley-Davidson dealership ensures your motorcycle receives the best possible care and service. They can also help with issues beyond programming, such as battery replacements or general key fob maintenance.
