Remote start is an incredibly convenient feature in modern vehicles, especially for Nissan owners. Imagine getting into a perfectly heated car on a frosty morning or a cooled cabin on a scorching summer day. This guide will walk you through the simple steps to remotely start your Nissan using your key fob, ensuring you can take full advantage of this feature.
Step-by-Step Guide to Remote Starting Your Nissan
Before you begin, ensure your Nissan is parked safely and all doors are securely closed. While your doors may already be locked, following these steps precisely will activate the remote start system effectively:
- Ensure Vehicle is in Range: Be within a reasonable distance of your Nissan so the key fob signal can reach it.
- Press the Lock Button: Locate the lock button on your Nissan key fob and press it once. This action signals to your vehicle that you wish to initiate the remote start sequence.
- Press and Hold the Remote Start Button: Immediately after pressing the lock button (within 5 seconds), find the remote start button on your key fob. This button is usually distinct and may be labeled with a circular arrow or similar icon. Press and hold this button for at least 2 seconds.
- Engine Starts and Climate Control Engages: If the process is successful, your Nissan’s engine will start. You’ll typically see the parking lights illuminate, indicating that the remote start is active. The automatic climate control system will also engage, beginning to heat or cool the cabin based on your previous settings.
- Automatic Shut-Off: For safety and security, the engine will automatically turn off after running for 10 minutes if no further action is taken.
Extending the Remote Start Duration
Nissan’s remote start system allows you to extend the initial runtime for added convenience. If you need a bit more time to warm up or cool down your vehicle, you can easily extend the remote start duration once:
- Repeat the Lock and Remote Start Sequence: While the engine is still running from the initial remote start, simply repeat steps 2 and 3 from the previous section. Press the lock button once, and then immediately press and hold the remote start button for at least 2 seconds.
- Additional 10 Minutes: Performing this extension will add another 10 minutes to the runtime. It’s important to note that the extension time is added from the moment you perform the extension. For example, if you extend after 8 minutes of the initial 10-minute runtime, you’ll get a total of 18 minutes of engine operation.
- Restarting Remote Start After Extension: After using the extension feature, you will need to manually start your Nissan using the ignition switch before you can use the remote start again. This reset occurs naturally when you enter your vehicle and start driving.
Troubleshooting Your Nissan Remote Start
If you find that your Nissan remote start isn’t working as expected, there are a few common things to check:
- Doors Not Properly Closed: Ensure all doors, hood, and trunk are fully closed and latched. The remote start system is designed to not engage if any entry points are detected as open.
- Vehicle Not in Park (P): Remote start will only function when your Nissan is in Park (P).
- Key Fob Battery: A weak battery in your key fob can sometimes limit its signal strength. Try replacing the battery to see if it resolves the issue.
- System Malfunction: If you’ve checked these basic points and the remote start still isn’t working, there may be a system issue requiring professional attention.
If you continue to experience problems with your Nissan remote start, it’s recommended to schedule a service appointment with a certified Nissan technician. They can diagnose any underlying issues and ensure your remote start system is functioning correctly, allowing you to enjoy the convenience it offers.
