Is your Nissan key fob looking worse for wear? Cracked, scratched, or even broken housings are common issues that can make your key fob feel cheap and unreliable. Before you consider expensive replacements, learn how easy it is to refresh your key fob with a brand new Nissan Key Fob Cover. This simple DIY project can save you money and restore the look and feel of your key fob in minutes.
Many Nissan owners experience the frustration of a deteriorating key fob. Daily use, drops, and general wear and tear can take their toll. You might recognize the tell-tale signs: cracks around the edges, especially near the keyring loop, or buttons that are becoming difficult to press. Just like the author of the original post, you might have even resorted to temporary fixes like tape or glue to prolong its life.
Fortunately, replacing the outer shell of your Nissan key fob is a straightforward process. You don’t need to be a car expert to do this – just follow these easy steps and give your keys a much-needed upgrade. A Nissan key fob cover replacement is an affordable and effective way to address these cosmetic and functional issues.
What You’ll Need for Your Nissan Key Fob Cover Replacement
Before you start, make sure you have the correct replacement cover. These are readily available online from retailers like eBay and Amazon. You’ll find various options, from complete replacement kits to front-only pieces. For this guide, we’re using a complete replacement cover set, ensuring a total refresh for your fob.
Your replacement kit should include the new front and back pieces of the Nissan key fob cover. Carefully unpack your new cover to ensure all parts are present and undamaged.
Step-by-Step Nissan Key Fob Cover Replacement Guide
Now, let’s get down to the replacement process. It’s easier than you might think!
Step 1: Open Your Old Key Fob
Carefully pry open your existing Nissan key fob. Most fobs are designed to snap together, so you can usually use your fingernail or a small flathead screwdriver to gently separate the two halves. Work your way around the seam until the fob opens up.
Step 2: Transfer the Circuit Board
Once open, you’ll see the circuit board and button pad inside. Carefully remove this assembly from the old, damaged cover. Place it directly into the new Nissan key fob cover. It should fit snugly into place.
Step 3: Don’t Forget the Metal Back Plate!
Here’s a crucial detail that’s easy to miss. The original Nissan key fob has a small metal plate on the back cover. This plate is essential for the fob to function correctly. The replacement cover might not include this metal piece.
Carefully remove the metal plate from the inside of your old back cover and transfer it to the new back cover. This step is vital for your Nissan key fob to work after the cover replacement.
Step 4: Assemble the New Cover
With the circuit board and metal plate in place, carefully snap the two halves of the new Nissan key fob cover together. Ensure they are firmly closed, and you should hear a click as they seal.
Enjoy Your Refreshed Nissan Key Fob
Congratulations! You’ve successfully replaced your Nissan key fob cover. Your keys should now look and feel brand new, without the expense of a complete fob replacement. This simple DIY task not only improves the aesthetics of your key fob but also protects the internal components from further damage. Enjoy the refreshed look and extended life of your Nissan key fob thanks to this easy and affordable upgrade.
