Nissan Murano Key Fob Programming: A Step-by-Step Guide

As your trusted automotive experts at keyfobx.com, we understand the frustration of a malfunctioning or new key fob. Programming your Nissan Murano key fob can seem daunting, but in many cases, it’s a process you can undertake yourself at home. This guide provides comprehensive, step-by-step instructions to help you program your Nissan Murano key fob, ensuring you regain seamless access to your vehicle.

Method 1: Standard Key Fob Programming Procedure

This is a common method for programming Nissan key fobs. Follow these steps carefully to ensure successful programming.

Step-by-Step Instructions for Method 1

1. Close and Lock Doors: Begin by ensuring all doors of your Nissan Murano are completely closed and locked. This is crucial for initiating the programming sequence.
2. Ignition Key Cycling: Insert your key into the ignition cylinder and remove it rapidly more than six times within a 10-second timeframe. It’s vital to fully remove the key from the ignition cylinder each time. Avoid rushing this step; a steady pace is key to success. Upon successful completion of this step, the hazard warning lamps should flash twice, and you may notice the side marker, tail, license plate lamps, and interior lights also flashing twice. This visual cue confirms the system has entered programming mode.
3. Ignition to ACC: Immediately insert the key back into the ignition cylinder and turn the ignition switch to the “ACC” (Accessory) position. At this point, the system is ready to receive the new key fob ID code, and any previously stored codes are erased.
4. Press Button on New Remote: Take your new remote key fob and press any button on it once. It’s important to only press the button once during this step. Pressing it multiple times can disrupt the programming process. If successful, the hazard warning lamps will flash again, and you’ll see the side marker, tail, license plate lamps, and interior lights flash twice, confirming successful programming.
5. Additional Remote Programming (Optional): If you are programming only one remote, skip this step. For additional remotes, release the door lock and then lock it again using the power door lock/unlock switch located on the driver’s side power window main switch.
6. Remove Key and Final Steps: Remove the key from the ignition. Unlock the driver’s side door, open the driver’s side door, and then close it again to finalize the programming sequence.

Troubleshooting for Method 1:

• Timing is Crucial: The speed of key insertion and removal is critical. Ensure you are not rushing but maintain a reasonably quick pace within the 10-second window.
• Door Locks: Double-check that all doors are securely locked before starting the procedure.
• Visual Confirmation: Carefully observe the hazard warning lamps and other lights for the flash confirmations at each step. If you don’t see these flashes, the system may not be entering programming mode, and you’ll need to restart from step 1.

Method 2: Alternative Key Fob Programming Procedure

If the standard method doesn’t work for your Nissan Murano, this alternative procedure might be successful.

Step-by-Step Instructions for Method 2

1. Close and Lock Doors: As with the previous method, begin by closing and locking all doors of your Nissan Murano.
2. Unlock Trunk via Door Switch: Use the door switch to unlock the trunk. This variation is a key difference from Method 1 and might be necessary for certain Murano models.
3. Ignition Key Cycling: Insert and remove the key from the ignition cylinder six times within 10 seconds. Remember to fully withdraw the key each time and maintain a consistent, moderately fast rhythm. Look for the double flash of the side marker, tail, license lamps, and interior illumination to confirm successful entry into programming mode.
4. Manual Door Lock/Unlock: Manually unlock and then lock the driver’s side door using the manual lock mechanism or the door lock switch.
5. Press Button on New Remote: Press any button on your new remote key fob once. If you are programming only one remote, proceed to step 7.
6. Additional Remote Programming (Optional): For each additional remote, repeat step 4 (manual door lock/unlock) and step 5 (press button on new remote).
7. Final Step: The programming procedure is now complete.

Troubleshooting for Method 2:

• Trunk Unlock Step: Ensure you are using the door switch to unlock the trunk and not the key fob or manual trunk release.
• Manual Door Lock: Be sure you are manually locking and unlocking the driver’s door in step 4 as described.
• Consistent Cycling: Maintain a consistent speed during the key cycling process in the ignition.

Method 3: ID Code Entry Procedure (Advanced)

This method provides a more detailed breakdown and might be helpful if the previous methods haven’t worked.

Step-by-Step Instructions for Method 3

1. Driver’s Seat and Door Lock: Sit in the driver’s seat, and ensure all doors are closed and locked.
2. Ignition Key Cycling with Hazard Confirmation: Insert and remove the key from the ignition cylinder more than six times within 10 seconds. The hazard warning lamps should flash twice to confirm the system has entered registration mode. Remember, complete key removal each time and avoid rushing are crucial.
3. Ignition to ACC: Insert the key into the ignition cylinder and turn it to the “ACC” position.
4. Press Remote Button for ID Entry: Press any button on the remote controller once. The hazard warning lamps should flash twice again, indicating that the oldest ID code is erased, and the new ID code is entered.
5. Additional Remotes? (Decision Point): You can program up to four remote ID codes. If you don’t need to program additional remotes, proceed to Step 9.
6. Lock Doors for Additional ID Entry: If adding more remotes, lock all doors using the LH (driver side) lock/unlock switch located in the main power window and door lock/unlock switch panel.
7. Press Remote Button Twice for Additional ID: Press any button on the remote controller twice. The hazard warning lamps will flash twice again, confirming the entry of the new ID code and erasure of the oldest one.
8. Repeat for More Remotes? (Loop): If you have more remotes to program, unlock the doors and repeat Steps 6 and 7 for each additional remote.
9. Completion and Check: Once you have programmed all desired remotes (up to a maximum of four), open the driver’s side door and test the operation of each remote to ensure they are correctly programmed.

Troubleshooting for Method 3:

• Maximum ID Codes: Remember that a maximum of four ID codes can be entered. Attempting to program more will be ignored, and you might need to clear existing codes if you’ve reached the limit.
• Double Press for Additional Remotes: Note the difference in step 7 – for additional remotes after the first, you need to press the button twice.
• Step-by-Step Adherence: Follow each step precisely as outlined, paying close attention to locking and unlocking procedures and button presses.

Conclusion

Programming your Nissan Murano key fob can often be accomplished at home using these methods. However, if you encounter difficulties or are unsure about any step, it’s always best to consult a professional automotive locksmith or your Nissan dealership. For more helpful guides and automotive key fob solutions, remember to visit keyfobx.com, your trusted resource for car key and remote expertise.