Losing a key fob or needing an extra one for your Pontiac G6 can be frustrating, especially when faced with expensive locksmith charges. Fortunately, programming a Pontiac G6 key fob is a straightforward process you can do yourself, often without any tools! This guide provides clear, step-by-step instructions for Pontiac G6 Key Fob Programming, empowering you to save money and time.
[Imagine image here: A hand holding a Pontiac G6 key fob with car keys in the background.](Replace with actual image link later)
Easy Steps to Program Your Pontiac G6 Key Fob:
- Get Comfortable: Sit inside your Pontiac G6. While the driver’s seat is typical, some find the front passenger seat more accessible for this procedure.
- Prepare the Ignition and Doors: Remove the ignition key and ensure all vehicle doors are completely closed.
- Fuse Removal: Locate and remove the MALL PGM fuse from your Pontiac G6’s fuse panel. Your owner’s manual will pinpoint the exact location of the fuse box and the MALL PGM fuse.
- Ignition Cycling: Turn the ignition to the ACC (Accessory) position. Then, quickly turn the ignition OFF and back to ACC within one second.
- Door Trigger: Open and then close any door of your Pontiac G6. Listen carefully for a chime. This chime indicates that the remote control door lock receiver has entered programming mode. If you don’t hear a chime, carefully repeat from step 1.
- Key Fob Programming: Take the Pontiac G6 key fob you wish to program. Press and hold both the LOCK and UNLOCK buttons simultaneously for approximately 14 seconds. You may first hear a chime confirming synchronization, followed by another chime at around 14 seconds, confirming successful programming.
- Program Additional Fobs (Optional): If you have more Pontiac G6 key fobs to program, repeat step 6 for each additional fob. Remember, you can program up to 4 fobs.
- Final Steps: Remove the key from the ignition. Reinstall the MALL PGM fuse back into its location in the fuse panel.
- Verification: Thoroughly test all programmed Pontiac G6 key fobs to confirm they are operating correctly, locking and unlocking your doors.
Important Programming Notes:
- Erase Previous Programming: When you enter programming mode and program the first key fob, all previously programmed fobs are erased. Therefore, ensure you reprogram all key fobs you intend to use during this session.
- Program One Vehicle at a Time: If you are programming key fobs for multiple vehicles, program them one at a time to prevent accidentally programming a fob to the wrong vehicle.
With these straightforward instructions, Pontiac G6 key fob programming becomes a DIY task, saving you the expense of a locksmith. Enjoy the convenience of your newly programmed key fobs!
