Your Ford key fob is an essential tool, allowing you to remotely lock, unlock, and even start your vehicle. Like any battery-powered device, the key fob battery will eventually need replacing. Knowing how to Change Battery On Ford Key Fob is a simple yet valuable skill for any Ford owner, saving you time and potential inconvenience. This guide will walk you through the process step-by-step, ensuring you can easily replace your Ford key fob battery and maintain seamless access to your vehicle.
Step 1: Access the Key Blade
The first step in changing your Ford key fob battery is to locate and release the mechanical key blade. Depending on your specific Ford model and key fob design, this process can vary slightly. Some fobs require you to manually slide or pull out the key blade, while others feature a release button that, when pressed, allows the blade to be extracted. Examine your key fob closely to identify the release mechanism. This key blade access point is crucial as it often reveals the opening seam of the key fob casing.
Step 2: Open the Key Fob Casing
Once the key blade is released, you’ll need to carefully open the key fob to access the battery compartment. For this step, a small flathead screwdriver or even a coin will be helpful. Locate the seam or notch, usually where the key blade was housed. Gently insert the flathead screwdriver or coin into this opening. Apply a slight twisting motion to carefully pry the key fob halves apart. Avoid using excessive force, as this could damage the casing. Work your way around the seam until the cover pops open, revealing the battery inside.
Step 3: Remove the Old Battery
With the key fob open, you will now see the battery. Ford key fobs typically use a small, circular battery, often a CR2032 type. To remove the old battery, you can again use your flathead screwdriver. Carefully wedge the tip of the screwdriver under the edge of the battery and gently pry upwards. Be mindful not to damage the battery contacts or any internal components of the key fob. The battery should pop out relatively easily. Take note of the battery’s orientation (positive side up or down) before removing it, as you’ll need to insert the new battery in the same way.
Step 4: Insert the New Battery
Now it’s time to insert the new battery. Ensure you have the correct replacement battery type – CR2032 is commonly used, but double-check your old battery or key fob manual to be certain. Position the new battery in the battery compartment, matching the orientation you noted in the previous step (usually the positive (+) side facing upwards). Press the new battery firmly into place until it is securely seated in the compartment.
Step 5: Close the Key Fob
Finally, carefully reassemble the key fob. Align the two halves of the casing and gently press them together until they snap securely shut. Ensure there are no gaps and that the fob feels properly closed. Once closed, test your key fob’s functions – lock, unlock, and remote start if applicable – to confirm the new battery is working correctly and you have successfully completed the change battery on ford key fob process.
By following these simple steps, you can confidently change battery on ford key fob yourself, ensuring you’re never caught out by a dead key fob battery. This simple maintenance task keeps you in control of your vehicle access and avoids unnecessary dealership visits for a minor issue.
