Losing or damaging your Ford Edge key fob can be a frustrating experience, often accompanied by hefty replacement costs from dealerships. Fortunately, replacing your Ford Edge key fob and programming it yourself is a viable and cost-effective option. This guide will walk you through the process of Ford Edge Key Fob Replacement, focusing on how to program a new intelligent access key, potentially saving you time and money.
Finding the Right Replacement Ford Edge Key Fob
Before you begin the programming process, ensuring you have the correct replacement key fob is crucial. Purchasing a key fob online, from platforms like eBay, can significantly reduce costs compared to dealership prices. However, precision is key when selecting your replacement.
Identify the Correct Key Fob Type:
- Check the internal numbers: Open your existing key fob (or the slot where the key inserts if you have a spare) and locate the part numbers inside. These numbers are vital for finding a compatible replacement.
- Remote Start Feature: Ford Edge key fobs come in versions with and without remote start. If your original fob has remote start, ensure your replacement also supports this feature if you wish to retain it. Buying the wrong type will lead to incompatibility.
By carefully checking these details, you minimize the risk of purchasing an incompatible key fob, setting the stage for a successful programming process.
Step-by-Step Guide to Program Your Ford Edge Intelligent Access Key
This procedure is designed for 2015 Ford Edge models and may be applicable to other models and remotes. It allows you to program a maximum of four intelligent access keys to your vehicle. Crucially, you must have two previously programmed intelligent access keys already inside your vehicle to perform this DIY programming. Ensure you also have your new, un-programmed key fob ready.
Preparation is Key:
- Ignition OFF: Ensure your Ford Edge’s ignition is completely switched off before starting.
- Doors Closed: All doors must be fully closed and remain closed throughout the entire procedure.
- Timing is Critical: Complete all five steps within 30 seconds of initiating the sequence. If you make a mistake or exceed the time, wait at least one minute before restarting the process.
- Procedure Comprehension: Read and thoroughly understand each step before you commence the programming.
Programming Steps:
- Console Access: Open the floor console storage compartment lid.
- First Programmed Key Insertion: Orient the first of your two existing, programmed key fobs with the buttons facing upwards and the keyring towards the rear of the vehicle. Place it into the backup tray located at the bottom of the console storage.
- Start/Stop Button – First Cycle: Press and release the Start/Stop button. Wait for five seconds, then press and release the Start/Stop button again. Remove the intelligent access key from the tray.
- Second Programmed Key Insertion: Within 10 seconds of removing the first key, place the second previously programmed intelligent access key into the backup tray. Press and release the Start/Stop button. Wait for five seconds, then press and release the Start/Stop button again. Remove this intelligent access key.
- New Key Programming: Wait five seconds, then place the new, un-programmed intelligent access key into the backup tray. Press and release the Start/Stop button.
Confirmation and Testing:
- Successful Programming: If the programming is successful, the doors of your Ford Edge will automatically lock, providing an audible confirmation.
- Functionality Test: Press the unlock button on your newly programmed key fob. Verify that the remote control now operates all functions (lock, unlock, remote start if applicable). Finally, start your vehicle using the new intelligent access key to ensure it is fully functional.
Troubleshooting:
- Programming Failure: If the doors do not lock, indicating unsuccessful programming, wait for one minute and carefully repeat all five steps. Timing and sequence are crucial for success. You may need to attempt the procedure a few times to get the timing precisely right.
Utilizing MyKey Feature (Optional)
Once your new key fob is programmed, consider setting it up as a “MyKey.” This Ford feature allows you to program restrictions on a specific key fob, such as limiting top speed or audio volume. This can be particularly useful if you lend your Ford Edge to other drivers, like younger family members, providing an added layer of control and safety. Consult your Ford Edge owner’s manual for instructions on setting up and customizing MyKey features.
By following these steps, you can successfully replace and program your Ford Edge key fob, regaining full access and control of your vehicle while avoiding potentially high dealership costs. Remember to always double-check compatibility and follow the programming steps precisely for the best results.
