Are you looking to upgrade your Ford Escape keys or need to program a new key fob? Many Ford Escape owners have been less than impressed with the original equipment manufacturer (OEM) keys. If you’re in this boat and considering aftermarket options like stylish flip keys, you might be wondering about programming them yourself. This guide will walk you through the steps to program your new Ford Escape key fob and get you back on the road quickly.
Programming Your Ford Escape Flip Key Remote – Step-by-Step
These instructions will enable the remote button functions on your new key fob, allowing you to lock, unlock, and use other remote features of your Ford Escape.
- Prepare Your Vehicle: Begin by opening the driver’s side door. Once open, locate and press the unlock button on the driver’s side door panel.
- Ignition Cycle: Insert your key into the ignition. Turn the ignition from the OFF position (I) to the RUN position (III, without starting the engine) and repeat this process a total of 8 times in quick succession. After the eighth cycle, turn the ignition back to the OFF position.
- Confirmation Beep: Upon completing the correct ignition sequence, your Ford Escape will signal that it has entered programming mode with a brief, quiet beep. This indicates the system is ready to learn new key fob signals.
- Remote Activation: Within ten seconds of hearing the confirmation beep, press any button on each remote you wish to program, including your original remotes and the new flip key fob. Each successful button press will be acknowledged by another beep from your vehicle, confirming the remote’s signal has been learned. Make sure to press a button on all remotes you intend to use, as the system typically clears previous programming during this process.
Programming Your Ford Escape Ignition Key – Step-by-Step
To ensure your new key will start your Ford Escape, you’ll need to program the ignition transponder. This process requires you to have at least two previously working keys.
- Insert First Working Key: Insert your first working Ford Escape key into the ignition. Turn the key to the RUN position, then immediately turn it back to the OFF position and remove the key.
- Insert Second Working Key: Immediately insert your second working Ford Escape key into the ignition. Turn this key to the RUN position, then turn it back to the OFF position and remove the key.
- Insert New Key: Now, quickly insert the new, unprogrammed key into the ignition. Turn the new key to the RUN position. If the programming is successful, the security light on your dashboard should turn off, and your new key will now start your Ford Escape.
- Repeat for Additional Keys: If you have more new keys to program, repeat steps 1-3 for each additional key.
By following these straightforward steps, you can easily program your Ford Escape key fob and ignition, saving yourself time and money. Enjoy the convenience and style of your newly programmed flip key!
