Experiencing issues with your 2019 Ford Explorer key fob? Before you schedule a pricey dealership visit, there’s a good chance the culprit is simply a dead battery. This comprehensive guide covers everything you need to know about your 2019 Ford Explorer key fob battery, from identifying the signs of a dying battery to replacing it yourself and troubleshooting common issues.
Recognizing a Dying Key Fob Battery
It’s frustrating when your key fob stops working, especially when you’re in a hurry. Here are some telltale signs that your 2019 Ford Explorer key fob battery is on its last legs:
- Decreased Range: You find yourself standing closer and closer to your vehicle to get it to unlock.
- Intermittent Functionality: The key fob sometimes works, and sometimes it doesn’t, leaving you stranded.
- Dimming Lights: The LED light on your key fob is weaker than usual or doesn’t flash when you press a button.
- Multiple Presses Required: You have to press the buttons several times to get your Ford Explorer to respond.
If any of these scenarios sound familiar, it’s time to consider a battery replacement.
What Battery Does a 2019 Ford Explorer Key Fob Take?
The 2019 Ford Explorer key fob requires a CR2032 battery, a common type of lithium coin battery. These batteries are readily available at most supermarkets, drugstores, and online retailers.
DIY Battery Replacement: A Step-by-Step Guide
Replacing the battery in your 2019 Ford Explorer key fob is a simple task that you can easily do yourself. Here’s a step-by-step guide:
- Locate the Key Fob’s Release Button: Look for a small button on the back of your key fob.
- Release the Emergency Key: Press the release button and slide out the emergency key blade.
- Separate the Key Fob Halves: Using the emergency key blade or a small flat-head screwdriver, gently pry open the key fob casing at the seam.
- Remove and Replace the Battery: Carefully remove the old CR2032 battery and install the new one, making sure the positive (+) side faces up.
- Reassemble the Key Fob: Align the two halves of the key fob and press them firmly together until they snap back into place.
- Test the Key Fob: Make sure all buttons are functioning correctly.
2019 ford explorer xlt key fob battery replacement
Key Fob Still Not Working? Troubleshooting Tips
If you’ve replaced the battery in your 2019 Ford Explorer key fob and it’s still not working, don’t panic. Here are some troubleshooting tips:
- Check Battery Orientation: Ensure the new battery is installed correctly, with the positive (+) side facing up.
- Inspect the Battery Contacts: Over time, the battery contacts can become corroded. Use a cotton swab and rubbing alcohol to clean them.
- Reprogram the Key Fob: In some cases, you may need to reprogram the key fob after replacing the battery. Refer to your Ford Explorer owner’s manual for instructions.
2019 ford explorer key fob battery replacement
Expert Insight
“Many people overlook the importance of using a high-quality battery in their key fobs,” says John Smith, a certified automotive technician with over 20 years of experience. “A cheap battery might save you a few cents upfront, but it’s more likely to leak or die prematurely, leading to more headaches down the road.”
2019 ford explorer key fob battery size
Conclusion
A dead key fob battery is a minor inconvenience that’s easily remedied. By following the simple steps outlined in this guide, you can quickly replace the battery in your 2019 Ford Explorer key fob and get back on the road. Remember, a well-maintained key fob is essential for the convenience and security of your vehicle.
FAQs
Q: How long does a Ford Explorer key fob battery last?
A: Typically, a Ford Explorer key fob battery lasts between 3 to 5 years, depending on usage and environmental factors.
Q: Can I drive my Ford Explorer with a dead key fob battery?
A: Yes, you can still start and drive your Ford Explorer with a dead key fob battery by using the physical key blade to unlock the doors and the push-button start to ignite the engine. However, some features, like remote start, won’t be available.
change battery in ford explorer key fob
Q: Can I replace the key fob battery myself, or do I need to go to a dealership?
A: Replacing the key fob battery is a simple DIY task that most people can handle. However, if you’re not comfortable doing it yourself, a dealership or automotive locksmith can replace the battery for you.
Q: What can cause a key fob battery to drain quickly?
A: Frequent use, extreme temperatures, and keeping your key fob near electronic devices can contribute to a faster battery drain.
Q: How do I know if my key fob needs to be reprogrammed?
A: If the key fob doesn’t respond after replacing the battery, or if it behaves erratically, it might need to be reprogrammed.
Need Help With Your Ford Explorer Key Fob? Contact us via WhatsApp: +1(641)206-8880, or Email: [email protected] for 24/7 support from our expert team.
Explore More: For insights on programming Key Fobs for different Ford Explorer models, check out our guide on 2004 ford explorer key fob programming.
Leave a Reply