Lost your Honda HRV key fob or need to program a new one? You’re in luck! Programming your Honda HRV key fob is a straightforward process you can complete yourself, saving you time and money compared to dealership programming fees. This step-by-step guide will walk you through the process, ensuring you can quickly regain access and control of your vehicle.
Step-by-Step Guide to Honda HRV Key Fob Programming
Follow these simple steps to program your Honda HRV key fob and get back on the road with a functional remote. Remember to perform these steps relatively quickly, especially the on/off key cycles.
Step 1: Gather All Your Honda HRV Remotes
Before you begin, ensure you have all the key fobs you intend to program for your Honda HRV. Even if you are only programming one new remote, the programming process will erase previously programmed remotes. Therefore, you must include all remotes you wish to use during this session to ensure they all function correctly afterward.
Step 2: Get Inside Your Honda HRV
Enter your Honda HRV and make sure all doors are fully closed and, importantly, unlocked. This is crucial for the programming sequence to initiate correctly. Ensure no doors are ajar and that the vehicle is ready to receive the programming commands.
Step 3: Turn the Ignition to the “ON” Position
Insert your key into the ignition and turn it to the “ON” position. This is the position just before you would start the engine. You should see the dashboard lights illuminate and the accessory lights come on. Do not start the engine; simply turn the key to the “ON” position.
Step 4: Initiate the Programming Sequence
Within five seconds of turning the key to the “ON” position, press the “LOCK” button on one of your Honda HRV remote controls for approximately one second. Timing is important here, so ensure you press the button promptly after turning the key.
Step 5: Turn the Ignition to the “OFF” Position
Immediately after pressing the “LOCK” button, turn the ignition key back to the “OFF” position. This action is part of the sequence that puts your Honda HRV into programming mode.
Step 6: Repeat the ON/OFF Cycle
Repeat Steps 4 and 5 two more times. This means you will perform the sequence of turning the key to “ON,” pressing the “LOCK” button, and then turning the key to “OFF” a total of three times. Each cycle must be completed within five seconds of the previous step to maintain the programming sequence.
Step 7: Enter Honda HRV Remote Programming Mode
Turn the key back to the “ON” position for the fourth time. Now, press the “LOCK” button on the remote once more. If you’ve successfully entered programming mode, you will hear the door locks “clunk” or make an audible locking sound. This sound indicates that your Honda HRV is now in Remote Programming Mode and is ready to learn the codes from your key fobs. Do not turn the key off at this point.
Step 8: Program Additional Honda HRV Remotes (Optional)
If you have additional Honda HRV key fobs to program, now is the time. Within 10 seconds of entering programming mode (indicated by the door lock “clunk”), press the “LOCK” button on each additional remote you want to program for one second each. After pressing the “LOCK” button on each remote, you should hear the door locks “clunk” again, confirming that each remote has been successfully programmed. You can program up to three remotes for each Honda HRV.
Step 9: Test Your Programmed Honda HRV Key Fobs
Turn the ignition key to the “OFF” position and remove the key from the ignition. Now, test each of your programmed key fobs to ensure they are working correctly. Press the “LOCK,” “UNLOCK,” and other buttons on each remote to verify they properly control the door locks and other functions of your Honda HRV.
Important Notes for Honda HRV Key Fob Programming
- Timing is Crucial: The timing between steps, especially the five-second window, is critical for successful Honda Hrv Key Fob Programming. If you exceed the time limit, you may need to start the process again.
- Battery Condition: Ensure the batteries in your key fobs are in good condition. Weak batteries can sometimes interfere with the programming process.
- Reprogramming After Battery Replacement: In most cases, you should not need to reprogram your Honda HRV key fob after simply replacing the battery. However, if you encounter issues after a battery change, repeating this programming process may resolve them.
- Lost Key Fobs: If you have lost a key fob, programming new ones and ensuring old ones are no longer recognized is a good security practice to prevent unauthorized access to your Honda HRV.
By following these steps, you can easily program your Honda HRV key fob and enjoy the convenience of keyless entry without the expense of dealership programming.
