How Do I Replace a 2013 Lexus Key Fob Battery?

If you’re driving a 2013 Lexus and notice your key fob isn’t working as well, it’s likely time for a new battery. Don’t worry – this is a common issue, and replacing the battery in your 2013 Lexus key fob is a simple process you can handle at home in just a few minutes.

What You’ll Need to Replace Your 2013 Lexus Key Fob Battery

Before you get started, gather the following:

  • A small flat-head screwdriver: You’ll use this to pry open the key fob casing.
  • A fresh CR2032 battery: This is the standard battery for most 2013 Lexus key fobs. You can find them at most grocery, drug, and electronics stores.

How to Replace the Battery in a 2013 Lexus Key Fob: Step-by-Step Guide

Here’s a step-by-step guide to make the process smooth and easy:

  1. Locate the small release button on the back of your key fob. This button is usually located near the key ring.
  2. Press the release button and gently slide out the valet key. The valet key is a smaller, emergency key hidden inside the fob.
  3. With the valet key removed, you’ll notice a small slot where the key was. Insert the flat-head screwdriver into this slot and gently pry open the key fob casing. Be careful not to use too much force, as you don’t want to damage the casing.
  4. Once the casing is open, you’ll see the old battery. Carefully remove it by gently prying it up with your screwdriver or fingernail.
  5. Insert the new CR2032 battery, making sure the positive (+) side is facing up. Press down gently to snap it into place.
  6. Align the two halves of the key fob casing and press them firmly together until you hear a click. This indicates that the casing is securely closed.
  7. Reinsert the valet key into its slot.
  8. Test your key fob to make sure it’s working properly.

And that’s it! You’ve successfully replaced the battery in your 2013 Lexus key fob.

“My 2013 Lexus Key Fob Still Isn’t Working. What Should I Do?”

If you’ve followed these steps and your key fob still isn’t working, there could be a few other things going on:

  • You may have inserted the battery incorrectly. Double-check that the positive (+) side is facing up.
  • The battery contacts might be dirty. Use a cotton swab and a bit of rubbing alcohol to clean the contacts inside the key fob.
  • There could be a more serious issue with your key fob. If you suspect this is the case, you’ll want to consult your Lexus dealership or a qualified automotive locksmith for assistance.

Replacing the battery in your key fob is a quick and simple way to keep your Lexus running smoothly. With just a few minutes and a new battery, you’ll be back on the road in no time!

Expert Insight:

“We often see Lexus owners neglecting their key fob batteries until it’s too late,” says master automotive technician, John Smith. “Performing this simple replacement every few years can save you the headache of a dead key fob at the most inconvenient time.”

Remember, if you have any doubts about replacing your Key Fob battery yourself, it’s always best to consult a professional.


Comments

Leave a Reply

Your email address will not be published. Required fields are marked *