Changing the battery in your 2013 Cadillac ATS key fob is a quick and easy process that can save you the hassle and expense of a trip to the dealership. This guide will walk you through each step, ensuring you can get back on the road with a fully functional key fob in no time.
Locating the Release Button and Opening Your Cadillac ATS Key Fob
The first step in changing your 2013 Cadillac ATS key fob battery is locating the small release button. This button is typically found on the side of the fob, near the key ring. Look closely – it might be quite small and discreet. Once you’ve found it, use a small flathead screwdriver or even your fingernail to gently press the button. This will release the mechanical key hidden inside the fob.
Now, with the mechanical key released, use it to pry open the key fob casing. There’s usually a small slot where the key fits perfectly for this purpose. Gently insert the key and twist or lever it to separate the two halves of the fob. Be careful not to use excessive force, as this could damage the casing.
Cadillac ATS Key Fob Release Button Location
Identifying and Replacing the Battery in Your 2013 Cadillac ATS Key Fob
Once you have the fob open, you’ll see the battery inside. It’s typically a CR2032 3V lithium battery, a common size readily available at most stores that sell batteries. Make a note of the battery’s orientation (positive (+) side up or down). Then, carefully remove the old battery. You can usually do this by gently prying it out with your fingernail or the flathead screwdriver.
With the old battery removed, insert the new CR2032 battery, making sure it’s oriented correctly in the same way as the old one. Press it firmly into place.
Closing and Testing Your Cadillac ATS Key Fob
Now that the new battery is in place, align the two halves of the key fob and press them together until you hear a click. This indicates the fob is securely closed. Insert the mechanical key back into its slot.
Finally, test the key fob to ensure it’s working correctly. Try locking and unlocking your car, and also test the remote start function if your vehicle has it. If everything is working as it should, you’re all set!
Replacing the Battery in a Cadillac ATS Key Fob
What Type of Battery Does a 2013 Cadillac ATS Key Fob Use?
The 2013 Cadillac ATS key fob uses a CR2032 3V lithium battery.
Where Can I Buy a Replacement Battery for My Key Fob?
CR2032 batteries are readily available at most drugstores, electronics stores, and online retailers.
How Often Should I Change My Key Fob Battery?
Typically, a key fob battery lasts between 2 to 4 years, depending on usage.
Can I Damage My Key Fob by Changing the Battery Myself?
While unlikely, it’s possible to damage the fob if excessive force is used. Be gentle and follow the steps carefully.
Expert Insight from John Miller, Automotive Electronics Specialist: “Remember, always use a high-quality CR2032 battery for optimal performance and lifespan. Cheaper batteries might not last as long.”
Expert Insight from Sarah Chen, Certified Automotive Technician: “If you’re uncomfortable changing the battery yourself, most dealerships and auto repair shops will do it for a small fee.”
Expert Insight from David Lee, Senior Automotive Engineer: “Regularly checking and replacing your key fob battery can prevent inconvenient lockouts and ensure reliable vehicle access.”
Closed Cadillac ATS Key Fob
Conclusion: Keeping Your 2013 Cadillac ATS Key Fob Powered Up
Changing the battery in your 2013 Cadillac ATS key fob is a straightforward task that anyone can handle. By following these simple steps, you can save yourself time and money, and keep your Cadillac’s key fob working perfectly.
FAQ:
- How long does it take to change the battery? It typically takes less than 5 minutes.
- What tools do I need? A small flathead screwdriver or even your fingernail is usually sufficient.
- Can I use any type of CR2032 battery? Yes, but it’s recommended to use a high-quality battery for optimal performance.
- What if my key fob still doesn’t work after changing the battery? There might be another issue with the fob. Consult your owner’s manual or a qualified technician.
- Can I damage my key fob during the process? Yes, if you apply too much force. Be gentle, particularly when prying open the casing.
- Where can I find a video tutorial? Check YouTube for video demonstrations on how to change the battery.
- What happens if I use the wrong type of battery? The key fob may not function correctly, or the battery may leak and damage the fob.
You might also be interested in these articles on KeyFobX:
- Key Fob Programming and Troubleshooting
- Understanding Different Types of Car Keys
Need more help? Contact our 24/7 support team via WhatsApp: +1(641)206-8880, or Email: [email protected]. We’re here to assist you.
Leave a Reply