How to Change Battery in 2017 Ford Fusion Key Fob

Changing the battery in your 2017 Ford Fusion key fob is a quick and easy process that can save you time and money. A dead key fob battery can leave you stranded, so knowing how to replace it yourself is a valuable skill. This guide will walk you through the steps involved in changing the battery in your 2017 Ford Fusion key fob, ensuring you’re back on the road in no time.

This process is surprisingly simple and requires only a few common household tools. In just a few minutes, you can have a working key fob again, avoiding the inconvenience and expense of a dealership visit. We’ll cover everything from the tools you’ll need to potential troubleshooting tips, ensuring you’re fully equipped to handle this simple DIY task.

Gathering Your Tools and Supplies

Before you begin, gather the necessary tools and supplies. This will make the process smoother and prevent any unnecessary delays. You’ll need:

• A small flat-head screwdriver or a similar tool for prying. A key or a thin coin can also work in a pinch.
• A new CR2032 battery. It’s essential to use the correct battery type to ensure proper key fob function. Using the wrong battery can damage your key fob.

Having these items ready beforehand will make the battery replacement process quick and easy.

Step-by-Step Guide to Changing the Battery

Follow these simple steps to replace the battery in your 2017 Ford Fusion key fob:

1. Locate the release button: On the side of your key fob, you’ll find a small button or slot. This is the key release button.
2. Release the metal key: Press the release button and slide the metal key out of the fob.
3. Pry open the fob: Using your flat-head screwdriver or similar tool, carefully insert it into the slot where the metal key was located. Gently pry the two halves of the key fob apart. Be careful not to damage the plastic casing.
4. Remove the old battery: Once the fob is open, you’ll see the CR2032 battery. Gently pry it out using your screwdriver.
5. Install the new battery: Place the new CR2032 battery into the compartment, ensuring the positive (+) side is facing up.
6. Reassemble the key fob: Align the two halves of the key fob and press them together until they snap shut.
7. Reinsert the metal key: Slide the metal key back into its slot.

Replacing the Battery in a 2017 Ford Fusion Key Fob

That’s it! Your 2017 Ford Fusion key fob should now be working perfectly.

Troubleshooting Tips

If your key fob still isn’t working after replacing the battery, try these troubleshooting tips:

• Check the battery orientation: Ensure the new battery is installed correctly with the positive (+) side facing up.
• Clean the battery contacts: Use a cotton swab and rubbing alcohol to clean the battery contacts inside the key fob.
• Try a different battery: Sometimes, a new battery can be faulty. Try a different CR2032 battery to rule out this possibility.
• Reprogram the key fob: In rare cases, you may need to reprogram your key fob. Refer to your owner’s manual for instructions on how to do this. Similar to how you might start your Ford Fusion with the key fob, reprogramming involves a specific sequence of actions.

If you continue to experience problems, consult a qualified automotive locksmith or your Ford dealership. Just as knowing how to change the battery in a 2017 Dodge Ram key fob can be helpful, understanding these troubleshooting steps for the Ford Fusion can save you time and frustration.

Conclusion

Changing the battery in your 2017 Ford Fusion key fob is a simple DIY task that anyone can do. By following the steps outlined in this guide, you can save yourself a trip to the dealership and keep your key fob working perfectly. Remember to always use the correct battery type and to be careful when prying open the fob to avoid damage.

FAQs

Q: How often should I change the battery in my Ford Fusion key fob?

A: Typically, a key fob battery lasts 2-3 years.

Q: What type of battery does the 2017 Ford Fusion key fob use?

A: It uses a CR2032 battery.

Q: Can I damage my key fob if I install the battery incorrectly?

A: Yes, installing the battery incorrectly can potentially damage the key fob.

Q: What should I do if my key fob still doesn’t work after replacing the battery?

A: Check the battery orientation, clean the contacts, try a different battery, or consult your owner’s manual for reprogramming instructions.

Q: Where can I buy a replacement CR2032 battery?

A: You can purchase CR2032 batteries at most electronics stores, pharmacies, and online retailers.

Q: How much does a CR2032 battery cost?

A: CR2032 batteries are relatively inexpensive, typically costing a few dollars each.

Q: Is there a way to test my key fob battery to see if it’s dead?

A: While there isn’t a built-in tester, a consistently unresponsive Key Fob is usually a good indicator of a dead battery.

For more helpful guides and information, check out our articles on how to start ford fusion with key fob and how to change battery in 2017 dodge ram key fob.

If you need further assistance, please contact us via WhatsApp: +1(641)206-8880, Email: [email protected] or visit us at 123 Maple Street, New York, USA 10001. We have a 24/7 customer support team.