How to Change Battery in 2020 RAV4 Key Fob

Changing the battery in your 2020 RAV4 key fob is a quick and easy process that can save you the hassle of a dead key. This guide will walk you through the steps to replace your key fob battery, ensuring you’re back on the road in no time.

Identifying Your 2020 RAV4 Key Fob Type

Before you begin, it’s important to identify which type of key fob you have. The 2020 RAV4 typically comes with two main key fob styles: the standard key fob with a flip-out key and the smart key fob. Knowing your key fob type will help you follow the correct battery replacement procedure.

Standard Key Fob Battery Replacement

  1. Locate the small release button on the side of the fob. This button is often near where the metal key emerges.
  2. Press the release button and gently pull out the metal key.
  3. Use the metal key or a small flat-head screwdriver to pry open the key fob casing along the seam. Be gentle to avoid damaging the plastic.
  4. Identify the battery inside. Note the type of battery (usually a CR2032) for replacement.
  5. Carefully remove the old battery and install the new one, ensuring the positive (+) side is facing up.
  6. Snap the key fob casing back together and reinsert the metal key.
  7. Test the key fob by locking and unlocking your RAV4.

Smart Key Fob Battery Replacement

  1. Locate the small notch or slot on the side of the smart key fob.
  2. Insert a small flat-head screwdriver or a similar tool into the notch and gently twist to separate the key fob casing.
  3. Identify the battery inside. It’s typically a CR2032. Note the orientation of the battery.
  4. Carefully remove the old battery and insert the new one, matching the orientation of the original battery.
  5. Snap the key fob casing back together.
  6. Test the smart key fob’s functionality by starting your RAV4.

how to change the battery on a rav4 key fob

Common Issues and Troubleshooting

Sometimes, even after replacing the battery, your key fob might not work correctly. Here are some common issues and how to address them:

  • Key fob still not working: Ensure you installed the correct battery type (CR2032) and that it’s oriented correctly. Try re-syncing the key fob to your RAV4 by following the instructions in your owner’s manual.
  • Key fob casing damaged: Be careful when prying open the casing. If it’s damaged, you may need a replacement key fob.

“Ensuring you use the correct battery and follow the proper steps will prevent damage and ensure your key fob works flawlessly,” says automotive expert, David Miller, ASE Certified Master Technician.

how to change battery in toyota rav4 key fob 2020

What type of battery does a 2020 RAV4 key fob use?

Most 2020 RAV4 key fobs utilize a CR2032 battery.

how do you replace a toyota key fob battery

“Regular battery changes, about every 2-3 years, will keep your key fob operating at peak performance,” advises Sarah Johnson, an experienced automotive electronics specialist. This proactive approach can prevent unexpected lockouts.

how to open car key fob

Conclusion

Changing the battery in your 2020 RAV4 key fob is a straightforward process, requiring minimal tools and time. By following these steps and adhering to the precautions, you can easily keep your key fob functioning properly and avoid the inconvenience of a dead battery.

FAQ

  1. How often should I change my RAV4 key fob battery? Every 2-3 years.
  2. What type of battery does my 2020 RAV4 key fob use? A CR2032.
  3. Where can I buy a replacement CR2032 battery? Most hardware stores, pharmacies, and online retailers.
  4. What if my key fob still doesn’t work after changing the battery? Check the battery orientation and try re-syncing the key fob.
  5. Can I damage my key fob by changing the battery myself? Yes, if you’re not careful when prying open the casing.
  6. What should I do if I damage my key fob? You may need a replacement key fob from a Toyota dealer or an authorized locksmith.
  7. Is there a way to check the remaining battery life in my RAV4 Key Fob? Not directly, but a weakening signal can indicate a low battery.

See also: how to program key fob for 2009 honda fit

Need more assistance? Contact us via WhatsApp: +1(641)206-8880, Email: [email protected] or visit us at 123 Maple Street, New York, USA 10001. Our customer service team is available 24/7.


Comments

Leave a Reply

Your email address will not be published. Required fields are marked *