How to Change Battery in Ford Explorer Key Fob

Changing the battery in your Ford Explorer key fob is a quick and easy process that can save you the hassle and expense of a trip to the dealership. This guide will walk you through the steps involved, so you can get back on the road in no time.

If your Ford Explorer key fob is acting up – maybe the lock/unlock buttons are unresponsive, or the car isn’t recognizing the key – a dead battery is likely the culprit. Fortunately, replacing the key fob battery is a simple DIY task that you can tackle in minutes. Read on for detailed instructions on how to change the battery in your Ford Explorer key fob. You’ll find clear, step-by-step directions for various model years, plus helpful tips and troubleshooting advice.

Need help with a 2013 Ford Explorer? Check out our guide on 2013 ford explorer key fob battery change.

Locating the Key Fob Battery Compartment

The first step in changing your Ford Explorer key fob battery is locating the battery compartment. Most Ford Explorer key fobs have a small release button or slot on the back. Some models may have a hidden key blade that you need to release first. This key blade often doubles as the emergency key to access your vehicle if the key fob battery is completely dead.

What Type of Battery Does My Ford Explorer Key Fob Use?

Ford Explorer key fobs typically use a CR2032 3V lithium battery. These are readily available at most electronics stores, pharmacies, and online. It’s a good idea to keep a spare CR2032 battery in your glove compartment for emergencies.

Step-by-Step Guide: How to Change Battery in Ford Explorer Key Fob

Here’s a general guide for most Ford Explorer models. However, it’s always best to consult your owner’s manual for model-specific instructions.

Locate the release button or slot: This is usually on the back of the key fob.
Press the release button or insert a small flathead screwdriver into the slot: This will separate the key fob housing.
Carefully pry open the key fob: Be gentle to avoid breaking any plastic clips.
Identify the battery: It should be a CR2032 3V lithium battery.
Remove the old battery: Use a small flathead screwdriver or your fingernail to gently pry out the old battery.
Insert the new battery: Make sure the positive (+) side is facing up, just like the old battery.
Snap the key fob housing back together: Ensure it closes securely.
Test the key fob: Try locking and unlocking your vehicle to verify the new battery is working.

Having trouble with your 2015 Ford Explorer key fob? See our 2015 ford explorer key fob battery change guide.

Troubleshooting Tips

If your key fob still isn’t working after changing the battery, try these troubleshooting tips:

Check the battery orientation: Ensure the positive (+) side is facing up.
Clean the battery contacts: Use a cotton swab and rubbing alcohol to clean the battery contacts inside the key fob.
Try reprogramming the key fob: Consult your owner’s manual for instructions on how to reprogram your key fob.
Consider a faulty key fob: If none of these steps work, the key fob itself may be faulty and require replacement.

Remember that a properly functioning key fob is essential for the security and convenience of your Ford Explorer.

For information on older Ford models, you might find our resources on the 2001 ford sport trac key fob helpful.

Common Key Fob Issues and Solutions

Besides a dead battery, other issues can affect your key fob. Here are some common problems and solutions:

Key fob not detected: Try reprogramming the key fob or checking the battery. Also, ensure there’s no interference from other electronic devices.
Buttons not working: Clean the buttons and check for any physical damage.
Key fob range is limited: This could indicate a weak battery or a problem with the key fob’s antenna.

If you’re experiencing issues with your 2004 Ford Taurus key fob, our article on 2004 ford taurus key fob not working may offer some solutions. Similarly, for 2006 Ford Explorer owners, we have a guide on 2006 ford explorer key fob not working.

Conclusion

Changing the battery in your Ford Explorer key fob is a simple task that most car owners can handle themselves. By following the steps outlined in this guide, you can quickly replace the battery and get your key fob working like new. Remember to consult your owner’s manual for model-specific instructions and always use the correct battery type.

FAQ

How long does a Ford Explorer key fob battery last? Typically, a key fob battery lasts between 3 and 5 years.
What type of battery do I need for my Ford Explorer key fob? A CR2032 3V lithium battery.
Can I change the battery myself? Yes, it’s a simple DIY task.
What if my key fob still doesn’t work after changing the battery? Try reprogramming the key fob, cleaning the battery contacts, or consult a professional.
Where can I buy a replacement battery? Most electronics stores, pharmacies, and online retailers sell CR2032 batteries.
How do I know if my key fob battery is dead? The car may not respond to the key fob, or the buttons may be unresponsive.
Can I damage my key fob by changing the battery myself? As long as you are careful, you shouldn’t damage your Key Fob.

Need further assistance? Contact us via WhatsApp: +1(641)206-8880, Email: [email protected]. Our 24/7 customer service team is here to help.