How to Change Battery in Jeep Key Fob 2019

Changing the battery in your 2019 Jeep key fob is a quick and easy process that can save you time and money. This guide will walk you through the steps involved in replacing the battery in your 2019 Jeep key fob, so you can get back on the road in no time.

What You’ll Need to Change Your 2019 Jeep Key Fob Battery

Before you begin, gather the following items:

A new CR2032 battery. This is the most common battery type for Jeep key fobs.
A small flathead screwdriver or a similar tool to pry open the key fob.
A replacement key fob (optional, but recommended). If your key fob becomes damaged during the process, having a backup is always a good idea.

Tools Needed for 2019 Jeep Key Fob Battery Replacement

Step-by-Step Guide: How to Change Battery in Jeep Key Fob 2019

Follow these simple steps to replace your 2019 Jeep key fob battery:

Locate the release button: On the side of your Jeep key fob, you’ll find a small slide button. This is the key release button.
Release the metal key: Push the release button and slide out the metal key.
Open the key fob: Use the flathead screwdriver (or similar tool) to carefully pry open the key fob casing. Start by inserting the screwdriver into the slot where the metal key was located. Gently pry the two halves of the fob apart. Be careful not to damage the internal components. You might find [how to change key fob battery] helpful for general key fob battery replacement tips.
Remove the old battery: Once the key fob is open, locate the CR2032 battery. Gently pry it out using your flathead screwdriver.

Opening a 2019 Jeep Key Fob with a Screwdriver

Insert the new battery: Place the new CR2032 battery into the compartment, making sure the positive (+) side is facing upwards.
Close the key fob: Align the two halves of the key fob and press them together firmly until they snap shut.
Reinsert the metal key: Slide the metal key back into its slot until it clicks into place.
Test the key fob: Try locking and unlocking your Jeep to ensure the new battery is working correctly.

Common Issues and Troubleshooting

Key fob still not working after battery replacement: If your key fob isn’t working after replacing the battery, try reprogramming it. Refer to your Jeep owner’s manual for instructions on how to do this. You can also find information online, such as [how to change battery in key fob jeep cherokee 2019].
Key fob difficult to open: If you’re having trouble opening the key fob, try using a slightly different tool, or try inserting the flathead screwdriver into a different part of the seam. Be gentle and patient. Knowing [what is the slide button on jeep cherokee key fob] can be helpful here.
Damaged key fob: If you accidentally damage your key fob during the process, you may need to purchase a new one. It’s always a good idea to have a spare key fob just in case.

Replacing the CR2032 Battery in a Jeep Key Fob

Why Change Your Own Jeep Key Fob Battery?

Changing your Jeep key fob battery yourself is a simple task that can save you the expense of a trip to the dealership or an auto shop. It only takes a few minutes and can be done with minimal tools. Check out [how to change key fob battery for 2019 jeep cherokee] for a specific guide to your Cherokee.

Conclusion

Changing the battery in your 2019 Jeep key fob is a straightforward process that anyone can do. By following these simple steps, you can save yourself time and money. If you are looking for instructions on a different key fob, you may find [how to change battery in mini key fob] helpful. Now you know How To Change Battery In Jeep Key Fob 2019!

FAQs

What type of battery does a 2019 Jeep key fob use?
A CR2032 battery.
How long does a Jeep key fob battery last?
Typically 2-3 years.
Do I need to reprogram my key fob after changing the battery?
Usually not, but it’s possible.
Where can I buy a CR2032 battery?
Most drugstores, electronics stores, and online retailers.
What should I do if my key fob still doesn’t work after changing the battery?
Consult your owner’s manual or contact a Jeep dealership.
Can I damage my key fob by changing the battery myself?
It’s possible if you aren’t careful.
Is there a video tutorial on how to change the battery?
Yes, many can be found online.

Potential Key Fob Problems and Their Solutions

Key Fob Not Working At All: Try changing the battery, reprogramming the fob, or checking for any damage.
Intermittent Key Fob Issues: This could indicate a weak battery or a problem with the key fob’s internal components.
Key Fob Buttons Sticking: Clean the key fob and check for any debris obstructing the buttons.