Is your Ford Edge key fob starting to feel a little unresponsive? Maybe you have to press the buttons harder, or get closer to your vehicle for it to work. It’s likely time for a battery replacement. Don’t worry, it’s a simple process you can easily do yourself in just a few minutes. This guide will walk you through exactly how to change the battery in your Ford Edge key fob, ensuring you’re back on the road with a fully functional remote in no time.
Ford Edge key fobs come in two main styles: the Integrated Keyhead Transmitter (IKT) and the Intelligent Access key (IA key). While they look slightly different, changing the battery in both is straightforward and requires no special tools. You’ll likely just need a small coin or a flat-head screwdriver. Let’s get started!
Changing the Battery in an Integrated Keyhead Transmitter (IKT) Key Fob
If your Ford Edge key fob looks like a standard key with the remote functions built into the head, you probably have an IKT. Here’s how to replace the battery:
-
Locate the Slot: On one end of your IKT key fob, near the keyring, you’ll find a small slot.
-
Open the Casing: Insert a thin coin (like a penny or dime) or a small flat-blade screwdriver into this slot. Gently twist the coin or screwdriver. This will pop open the battery cover.
-
Remove the Battery Cover and Gasket: Once twisted, the battery cover should easily detach. Be careful not to lose the small rubber gasket that may come off with the cover or remain on the transmitter. This gasket helps protect the key fob from moisture.
-
Take Out the Old Battery: Remove the old battery. Note the orientation of the battery (positive side up or down) before you remove it. This is crucial for inserting the new battery correctly.
-
Insert the New Battery: Place the new battery into the compartment with the correct orientation as the old one. Typically, these key fobs use a CR2032 type battery. Ensure it’s firmly seated in the housing.
-
Reattach the Battery Cover: Snap the battery cover back onto the key fob until it clicks securely into place.
Changing the Battery in an Intelligent Access Key (IA Key) Fob
If your Ford Edge key fob is a bit more modern-looking, often thicker and without a visible metal key part (unless you eject a hidden one), you likely have an IA key. Here’s how to change its battery:
-
Remove the Backup Key: Locate the small release button or latch on your IA key fob. Press it to release and slide out the mechanical backup key.