How to Program a 2010 Nissan Murano Key Fob

Programming a 2010 Nissan Murano key fob can seem daunting, but it’s often simpler than you think. Whether you’ve lost your fob, need a replacement, or simply want to program a spare, this guide will walk you through the process for a 2010 Nissan Murano key fob programming. We’ll cover the necessary steps, common pitfalls, and some helpful tips to make the process as smooth as possible.

Understanding Your 2010 Nissan Murano Key Fob

Before diving into the programming process, it’s helpful to understand the different types of key fobs for the 2010 Nissan Murano. There are two main types: the standard key fob with lock, unlock, and panic buttons, and the Intelligent Key system with push-button start. The programming process can vary slightly depending on which system you have. Knowing your system is the first step in successful 2010 Nissan Murano key fob programming.

Types of 2010 Nissan Murano Key Fobs

Standard Key Fob: This is the most common type and requires you to manually insert the key into the ignition.
Intelligent Key: This system allows you to unlock and start the car without taking the key fob out of your pocket or purse.

Gathering Your Supplies for 2010 Nissan Murano Key Fob Programming

Before you begin, ensure you have all the necessary items. This includes all the key fobs you want to program (both old and new) and a working key fob to initiate the programming sequence. Having everything ready beforehand will save you time and frustration during the 2010 Nissan Murano key fob programming process.

Step-by-Step Guide to Programming a 2010 Nissan Murano Key Fob (Standard System)

Here’s a detailed guide for programming a standard key fob for your 2010 Nissan Murano:

Get inside your Murano: Close all doors and lock them using the power door lock switch on the driver’s side door.
Insert and remove the key: Insert your working key into the ignition and remove it six times within 10 seconds. This step puts the car into programming mode.
Hazard lights flash: If done correctly, the hazard lights will flash twice.
Insert the key again: Insert the key into the ignition and turn it to the “ON” position (without starting the engine).
Press any button on the key fob: Press any button on the key fob you wish to program. You should hear a chime confirming successful programming.
Program additional key fobs (optional): Repeat step 5 for any other key fobs you want to program, one at a time.
Turn the key to the “OFF” position: Once all fobs are programmed, turn the key to the “OFF” position to exit programming mode.
Test the new key fob: Try locking and unlocking your Murano with the newly programmed key fob.

Programming an Intelligent Key (Push-Button Start)

The process for programming an Intelligent Key is slightly different:

Get inside your Murano: Make sure all doors are closed.
Have all key fobs: Gather all the Intelligent Keys you intend to program. You will need to program all keys at the same time.
Press the brake pedal: Press and hold the brake pedal throughout the entire programming procedure.
Press the START/STOP button: Press the START/STOP button four times without touching the brake pedal.
Insert the mechanical key: Insert the mechanical key (hidden inside the Intelligent Key) into the ignition.
Turn the key to the “ON” position: Turn the key to the “ON” position without starting the car.
Press any button on each Intelligent Key: Press any button on each key fob you want to program within five seconds of each other. The hazard lights will flash to confirm successful programming.

2010 Nissan Murano Intelligent Key Programming

Troubleshooting Common Issues

Sometimes, you might encounter issues during the programming process. Here are some common problems and solutions:

Hazard lights don’t flash: Make sure you’re following the timing precisely. Try the process again from the beginning.
Key fob doesn’t work after programming: Try replacing the battery in the key fob.
Still having problems? Consult your owner’s manual or a qualified automotive locksmith.

Troubleshooting Common Key Fob Programming Issues in 2010 Nissan Murano

Conclusion

Programming a 2010 Nissan Murano key fob can be a straightforward process when you follow the correct steps. Whether you have the standard key or the Intelligent Key system, having a spare or replacement fob programmed provides convenience and peace of mind. If you encounter any issues, refer to your owner’s manual or seek assistance from a qualified professional. Remember, successful 2010 Nissan Murano key fob programming is just a few steps away.

FAQ

How many key fobs can I program to my 2010 Nissan Murano? You can program up to four key fobs.
Do I need a working key fob to program a new one? Yes, a working key fob is required to initiate the programming mode.
Can I program a key fob myself, or do I need a locksmith? You can often program a key fob yourself by following the steps outlined above. However, if you encounter issues, a locksmith can assist you.
What if I lose all my key fobs? If you lose all your key fobs, you will need to contact a Nissan dealership or a qualified automotive locksmith to have new keys programmed.
How much does it cost to program a Nissan Murano key fob? The cost varies depending on your location and the service provider, but it typically ranges from $50 to $150.
How long does the key fob programming process take? The programming process itself usually takes only a few minutes.
What type of battery does the 2010 Nissan Murano key fob use? The key fob uses a CR2032 battery.

Common Scenarios

Lost all keys: Contact a Nissan dealer or locksmith for assistance.
Key fob stopped working: Try replacing the battery first.
Adding a spare key: Follow the steps outlined above for your key fob type.