If you’ve lost or damaged your 2017 Chevy Malibu key fob, or simply need an extra one, programming it yourself can save you time and money. It might seem intimidating, but with a few simple steps and a bit of patience, you can have your new key fob working in no time. This guide will walk you through the entire process, providing all the information you need to get the job done.
The process involves using your existing working key fob to program the new one. Before you begin, make sure you have both the working fob and the new one you want to program readily available.
Programming Your 2017 Chevy Malibu Key Fob: A Step-by-Step Guide
Here’s a detailed breakdown of how to program your 2017 Chevy Malibu key fob:
- Get in the Driver’s Seat: Start by sitting comfortably in the driver’s seat with all doors closed and windows rolled up.
- Insert the Working Key Fob: Put your existing working key fob into the ignition.
- Turn the Ignition On: Turn the key to the “On” position. Don’t start the engine. Wait for the dashboard lights to illuminate.
- Press and Hold the Lock Button: Locate the “Lock” button on your working key fob and press it down. Keep holding it down for the entire duration of the next step.
- Cycle the Ignition to “Off” and “On”: While holding the “Lock” button, turn the key to the “Off” position and then back to the “On” position. Do this three times in quick succession.
- Release the “Lock” Button: Once you’ve cycled the ignition three times, you can release the “Lock” button.
- Wait for the Confirmation Chime: Your Chevy Malibu should respond with a chime sound, indicating that it has entered programming mode.
- Press Any Button on the New Key Fob: Within 30 seconds of hearing the chime, press any button on the new key fob you want to program.
- Listen for a Second Chime: The car will chime again, confirming that the new key fob has been successfully programmed.
- Repeat for Additional Fobs: If you need to program more than one key fob, repeat steps 8 and 9 for each additional fob. Remember, you have 30 seconds after each chime to program a new fob.
11 Turn the Ignition Off: Once you have finished programming all your fobs, turn the ignition to the “Off” position.
Congratulations! You have successfully programmed your 2017 Chevy Malibu key fob. You can now test the new fob by locking and unlocking the doors and starting the engine.
Important Notes and Troubleshooting Tips:
- Exact Sequence: Make sure to follow the ignition cycling and button pressing sequence precisely. Any deviation might interrupt the programming mode.
- Proximity to the Vehicle: Keep the new key fob close to the ignition during programming for optimal signal reception.
- Battery Life: If your car doesn’t enter programming mode or the new fob doesn’t program correctly, ensure both your existing and new key fob batteries are fresh. Weak batteries can cause communication issues.
- Owner’s Manual: Refer to your 2017 Chevy Malibu owner’s manual for model-specific instructions and additional troubleshooting steps.
Programming your 2017 Chevy Malibu Key Fob is a simple DIY task that can save you money and the hassle of a trip to the dealership. If you encounter any difficulties or have further questions, don’t hesitate to contact a qualified automotive locksmith or your Chevy dealership for assistance.
Leave a Reply