How to Replace Buttons on Your Hyundai Key Fob

Have you worn down the buttons on your Hyundai key fob, making it difficult to unlock or start your car? Don’t worry, this is a common issue with a surprisingly easy fix. Replacing the buttons on your Hyundai key fob is a simple DIY project that can save you the cost of a brand new fob.

This guide will walk you through everything you need to know about how to replace buttons on a Hyundai key fob.

Understanding the Problem: Why Key Fob Buttons Wear Out

Before we dive into the replacement process, let’s take a look at why your Hyundai key fob buttons wear out in the first place. The buttons on your key fob are made from a rubber-like material that can degrade over time. Repeated pressing, exposure to heat, and even everyday wear and tear can cause the buttons to crack, tear, or become less responsive.

What You’ll Need to Replace Your Hyundai Key Fob Buttons

The good news is that replacing the buttons on your Hyundai key fob is a relatively inexpensive repair. Here’s what you’ll need:

A replacement button pad: You can find these online or at some auto parts stores. Make sure you choose a replacement pad that is compatible with your specific Hyundai model.
A small flat-head screwdriver or a plastic pry tool
Optional: A small container to keep track of the small screws

How to Replace Buttons on a Hyundai Key Fob: A Step-by-Step Guide

Once you have your materials gathered, you’re ready to begin:

Open the key fob: Carefully pry open your Hyundai key fob using the flat-head screwdriver or plastic pry tool. There’s usually a small notch or seam where you can insert the tool. Work your way around the edge of the key fob until the two halves separate.
Locate and remove the battery: The battery is usually held in place with a small clip or screw. Remove the battery to avoid any accidental shorts during the process.
Remove the circuit board: The circuit board is usually held in place by a few small screws. Remove these screws and carefully lift the circuit board away from the key fob housing.
Replace the button pad: The button pad is usually attached to the circuit board with adhesive. Carefully peel off the old button pad and align the new one in its place. Press firmly to ensure it adheres properly.
Reassemble the key fob: Once the new button pad is in place, reassemble the key fob by following the previous steps in reverse order. Make sure all screws are securely fastened.

Testing Your New Key Fob Buttons

After reassembling your key fob, insert the battery and test all the buttons to make sure they are functioning properly.

Pro Tip from John Miller, Senior Automotive Technician: “When reassembling your key fob, be sure to align the side buttons correctly, as misalignment can cause them to malfunction.”

Still Having Trouble?

If you’re still having trouble with your Hyundai key fob, there might be a more serious issue that requires professional attention.

For more information on Hyundai key fob maintenance and repair, you can check out these resources:

Frequently Asked Questions

Q: Can I replace the entire key fob myself?

A: While replacing buttons is a fairly simple DIY project, replacing the entire key fob can be more complex and may require programming. It’s often best to consult a professional for this.

Q: How long do Hyundai key fob batteries typically last?

A: Key fob batteries usually last between 3 to 5 years, depending on usage and environmental factors.

Q: My Hyundai key fob got wet. What should I do?

A: Remove the battery immediately and allow the key fob to dry completely before attempting to use it again. If you’re still experiencing issues, it’s best to seek professional help.

Need More Help?

If you’re experiencing difficulties with your Hyundai Key Fob or need assistance with other car-related issues, our team is here to help! Contact us via WhatsApp: +1(641)206-8880 or Email: [email protected]. We have a 24/7 customer support team ready to assist you.