Are you looking to take apart your Volkswagen key fob? Whether you need to replace the battery, fix a button, or understand its inner workings, disassembling your VW key fob can seem daunting. This guide provides a step-by-step process to safely open your VW key fob, based on the experience of a fellow VW owner. Please note, attempting this procedure is at your own risk. If you are not comfortable with DIY electronics repair, it is always recommended to seek professional help.
Step 1: Remove the Battery Cover
The first step is to remove the battery cover. This is usually located on the back of the key fob and can be detached by sliding or prying it open. Refer to your key fob manual if you are unsure of the exact mechanism for your model.
Step 2: Identify the Front Pin Location
Once the battery cover is off, locate the front pin. As shown in the original guide, this pin is situated underneath the key blade itself. You will need to access this pin to separate the key fob halves.
Step 3: Access the Rear Pin by Cutting the Case
The rear pin is positioned parallel to the keyring loop. Unfortunately, to access this rear pin, you will need to carefully cut away a small section of the plastic casing. Specifically, the bottom left-hand corner of the fob needs to be cut to expose the pin. This cut is made in an area that is not readily visible once the fob is reassembled.
Step 4: Remove the Rear Pin
Using a thin screwdriver or a similar tool, push the rear pin from left to right. This will help loosen the pin and allow for its removal.
Step 5: Expose and Remove the Front Pin
Similar to the rear pin, you will likely need to make a small cut around the front pin. This is to allow enough space to grip the pin with needle-nose pliers. Be careful not to damage any internal components while making this cut.
Step 6: Separate the Key Fob Casing
With both pins removed, you should now be able to separate the two halves of the key fob casing. Start by gently unsnapping the case near the panic button area. Then, carefully work your way around the perimeter of the fob to fully separate the case.
Step 7: Overview of Internal Components
Once the case is open, you will see the internal components of your VW key fob. This may include the circuit board, battery housing, and buttons. Take note of the arrangement of these parts if you intend to reassemble the key fob later.
Conclusion
Disassembling your VW key fob can be accomplished with careful steps and the right tools. This guide, based on a real user experience, provides a detailed walkthrough. Remember to proceed with caution and at your own risk. If you are unsure about any step, seeking professional assistance is always a wise decision. By following these instructions, you can gain access to the inner workings of your VW key fob for battery replacement or other minor repairs.
