If your 2013 Hyundai Santa Fe key fob has been acting up, there’s a good chance the battery is running low. Luckily, replacing the battery is a quick and easy fix you can do yourself at home with just a few simple tools. This guide will walk you through the process step-by-step.
What You’ll Need:
- A new CR2032 battery (available at most hardware and electronics stores)
- A small flat-head screwdriver
- Optional: A plastic pry tool (to avoid scratching your key fob)
Locating the Battery Compartment
Most 2013 Hyundai Santa Fe key fobs have a separate battery compartment for easy access. Here’s how to find it:
- Flip your key fob over and locate the small circular button on the back.
- Press this button firmly to release the metal key from the fob.
- With the metal key removed, you should see a small slot or indentation where the key was inserted.
Opening the Key Fob
- Insert your flat-head screwdriver (or plastic pry tool) into the slot where the metal key was removed.
- Gently twist the screwdriver to pry open the two halves of the key fob. You may hear a slight clicking sound as the tabs release.
- Be careful not to apply too much force, as this could damage the key fob casing.
Replacing the Battery
- Once the key fob is open, you’ll see the CR2032 battery inside.
- Carefully remove the old battery by gently prying it out with your screwdriver or fingernail.
- Insert the new CR2032 battery, making sure the positive (+) side is facing up.
- Align the two halves of the key fob and press them together firmly until you hear a click, indicating they are securely closed.
Testing the Key Fob
After replacing the battery, test your key fob to make sure it’s working properly.
- Try locking and unlocking your car doors using both the buttons on the fob and the keyless entry system.
- Start your engine using the push-button start (if equipped).
Troubleshooting
If your key fob is still not working after replacing the battery, here are a few things to check:
- Make sure you installed the new battery correctly with the positive (+) side facing up.
- Inspect the battery contacts inside the key fob for any dirt or corrosion. If present, clean them gently with a cotton swab and rubbing alcohol.
- If the issue persists, it’s possible there’s a problem with the key fob itself, and you may need to consult with a Hyundai dealership or qualified automotive locksmith.
Conclusion
Replacing the battery in your 2013 Hyundai Santa Fe Key Fob is a simple DIY task that can save you time and money. By following these easy steps, you can have your Key Fob back in working order in no time. Remember, keeping your Key Fob in top condition ensures seamless access and operation of your vehicle.
Leave a Reply