The Tesla Model X key fob is crucial for vehicle access and operation. Eventually, the battery will need replacing. This guide provides simple, step-by-step instructions on how to replace your Tesla Model X Key Fob Battery quickly and easily at home.
Recognizing a Low Key Fob Battery
Your Tesla Model X will typically display a message on the instrument panel when the key fob battery is low. This is your primary indicator that a replacement is needed. The battery life expectancy is usually around one year with normal use. To avoid unexpected issues, it’s wise to understand how to perform a tesla model x key fob battery replacement proactively.
Step-by-Step Tesla Model X Key Fob Battery Replacement
Replacing your tesla model x key fob battery is a straightforward process. Follow these steps for a successful battery change.
Step 1: Accessing the Battery Compartment
Place the key fob button-side down on a soft surface. Use a small flat tool or your fingernail to gently pry open the bottom cover.
If you have a lanyard attached, you can use it to remove the cover by placing your thumb against the “X” on the bottom cover and firmly pulling the lanyard towards you. This action pushes the key fob off its cover. Alternatively, you can pry the cover off using a small flat-bladed tool, a fingernail, or a Tesla-provided tool against the lanyard cord.
Step 2: Removing the Old Battery
Carefully remove the old battery. It’s held in place by retaining clips. Gently angle the battery to release it from these clips. Ensure you handle the battery responsibly and consider recycling options for used batteries.
Step 3: Installing the New CR2354 Battery
Insert a new CR2354 battery, ensuring the ‘+’ side faces up. Slide it into position at an angle towards the positive contact (the contact located near the center of the key fob), then press down firmly on the other side.
Panasonic CR2354 batteries are recommended for optimal performance and longevity in your tesla model x key fob. These batteries are widely available at online retailers, local supermarkets, and drug stores. Wipe the new battery clean before fitting and avoid touching the flat surfaces to maximize battery life. Fingerprints can reduce battery lifespan.
Caution: The battery should press against the spring on the positive contact. Do not place the battery directly on top of the contact and force it down vertically, as this may damage the contact.
Step 4: Reassembling the Key Fob
Align the tabs on the widest side of the cover with the corresponding slots on the key fob. Press the cover firmly until it snaps back into place, ensuring a secure closure.
Step 5: Testing the Key Fob
Test the key fob by unlocking and locking your Tesla Model X to ensure it’s working correctly after the tesla model x key fob battery replacement.
Conclusion
Replacing your tesla model x key fob battery is a simple DIY task. Following these steps ensures your key fob remains functional and provides uninterrupted access to your vehicle. For best practice, Tesla recommends replacing batteries in all key fobs at the same time to maintain consistent performance across all your key fobs.
