2013 Toyota Highlander Key Fob Battery CR2032

What Size Battery for 2013 Toyota Highlander Key Fob?

Finding the right battery for your 2013 Toyota Highlander key fob can be a surprisingly tricky task. You might be staring at a wall of batteries at the store, unsure which one to pick. This guide will tell you exactly what size battery you need for your 2013 Toyota Highlander key fob, how to replace it, and offer some helpful tips for maintaining your key fob.

Identifying Your 2013 Toyota Highlander Key Fob

Before diving into battery specifics, let’s make sure we’re talking about the same key fob. The 2013 Toyota Highlander typically uses a standard flip key fob or a smart key fob, depending on the trim level. Understanding which one you have is important for identifying the correct battery. The standard flip key has a physical key that folds out, while the smart key is typically thicker and may have buttons like “push to start.”

What Size Battery Does a 2013 Toyota Highlander Key Fob Use?

Both the standard flip key fob and the smart key for the 2013 Toyota Highlander use a CR2032 battery. This is a common lithium button cell battery that is readily available at most stores that sell batteries. Make sure to purchase a reputable brand to ensure longevity and proper functionality.

2013 Toyota Highlander Key Fob Battery CR20322013 Toyota Highlander Key Fob Battery CR2032

How to Replace the Battery in Your 2013 Toyota Highlander Key Fob

Replacing the battery is a simple DIY task that can save you a trip to the dealership. Here’s a step-by-step guide:

  1. Locate the release notch: On the side of your key fob, you’ll find a small notch or slot. This is where you’ll insert a small flathead screwdriver or a similar tool.
  2. Gently pry open the key fob: Insert the screwdriver into the notch and gently twist or pry to separate the two halves of the key fob. Be careful not to use excessive force, which could damage the casing.
  3. Identify the old battery: Inside, you’ll see the CR2032 battery. Note its orientation.
  4. Remove the old battery: Carefully remove the old battery. You can use the screwdriver or your fingernail to pry it out.
  5. Insert the new battery: Place the new CR2032 battery in the same orientation as the old one. Make sure it sits snugly in place.
  6. Close the key fob: Align the two halves of the key fob and press them together until they snap shut.

Replacing the Battery in a 2013 Toyota Highlander Key FobReplacing the Battery in a 2013 Toyota Highlander Key Fob

Tips for Maintaining Your Key Fob

Here are some tips to keep your key fob in good working order:

  • Avoid extreme temperatures: Extreme heat or cold can affect battery life.
  • Keep it dry: Moisture can damage the internal components of the key fob.
  • Check the battery regularly: Replace the battery every 1-2 years, or sooner if you notice the key fob’s range decreasing.

“Regular battery replacement is key to avoiding unexpected lockouts,” says John Carter, Senior Automotive Technician at Carter’s Auto Repair. “A fresh battery every year or two can save you a lot of hassle in the long run.”

Troubleshooting Key Fob Issues

Sometimes, even with a new battery, your key fob might not work. This could be due to other issues, such as a faulty key fob, a problem with your car’s receiver, or even a blown fuse.

“If you’ve replaced the battery and your key fob still isn’t working, it’s best to consult a qualified automotive technician,” advises Maria Sanchez, Electrical Systems Specialist at Sanchez Automotive Solutions. “They can diagnose the problem accurately and recommend the appropriate solution.”

Conclusion

Knowing What Size Battery For 2013 Toyota Highlander Key Fob is crucial for keeping your vehicle accessible. Remember, it’s a CR2032 battery, readily available and easy to replace. By following the simple steps outlined above, you can replace the battery yourself and keep your key fob functioning smoothly.

FAQ

  1. How often should I replace my key fob battery?
  2. What can I do if my key fob doesn’t work after replacing the battery?
  3. Where can I buy a CR2032 battery?
  4. Can I use a different type of battery in my 2013 Toyota Highlander key fob?
  5. How do I know if my key fob is faulty?
  6. What should I do if I lose my key fob?
  7. How much does it cost to replace a Toyota Highlander key fob?

Need help with your car Key Fob or other automotive diagnostic needs? Contact us via WhatsApp: +1(641)206-8880, Email: [email protected] or visit us at 123 Maple Street, New York, USA 10001. Our customer support team is available 24/7.


Comments

Leave a Reply

Your email address will not be published. Required fields are marked *