Lost your spare key or need to replace a broken key fob for your 2011 Ford F-150? Programming a new key fob yourself can save you time and money compared to visiting a dealership. This guide will walk you through the process of programming a new 2011 F150 Key Fob, allowing you to get back on the road quickly.
Before you begin, it’s essential to ensure you have the correct type of key and understand the requirements for self-programming. This method applies to adding spare keys, provided you already have two working, programmed keys.
To program a new 2011 f150 key fob, you will need the following:
- Two Previously Programmed Keys: These are keys that currently start and operate your 2011 Ford F-150. If you don’t have two working keys, you will need to visit an authorized dealer or locksmith for programming.
- New Unprogrammed Key: This is the new key fob you wish to program. Ensure it is compatible with the 2011 Ford F-150 and is a SecuriLock key. You will also need to have the key physically cut to match your ignition.
Once you have gathered these items, follow these steps to program your 2011 f150 key fob:
- Insert First Programmed Key: Place your first previously programmed key into the ignition. Turn the ignition from the OFF position to the ON position. Keep it in the ON position for at least one second, but no longer than 10 seconds.
- Turn Ignition OFF and Remove Key: Turn the ignition back to the OFF position and remove the first programmed key from the ignition.
- Insert Second Programmed Key: Within three to ten seconds of removing the first key, insert your second previously programmed key into the ignition. Turn the ignition from OFF to ON again, holding it in the ON position for one to ten seconds.
- Turn Ignition OFF and Remove Key: Turn the ignition back to the OFF position and remove the second programmed key.
- Insert New Unprogrammed Key: Within three to ten seconds after removing the second programmed key, insert your new, uncut, unprogrammed key into the ignition. Turn the ignition from OFF to ON, and maintain it in the ON position for at least one second, but no more than 10 seconds.
If the programming is successful, your new 2011 f150 key fob will now be programmed to your vehicle and will start the engine.
Important Considerations:
- Key Cutting: Before programming, ensure your new key is cut correctly to match your vehicle’s ignition. A locksmith or dealership can handle this.
- Maximum Keys: A 2011 Ford F-150 can have a maximum of eight programmed keys.
- SecuriLock Keys: Only SecuriLock keys are compatible with your vehicle’s immobilizer system.
- No Two Programmed Keys?: If you do not have two previously programmed keys, you will not be able to perform this DIY programming procedure. You must visit an authorized Ford dealer or a qualified locksmith to program your new 2011 f150 key fob.
By following these instructions carefully, you can successfully program a new 2011 f150 key fob, providing you have two existing programmed keys. This simple process can save you a trip to the dealer and get you back to using your Ford F-150 with ease.
