Lost your 2015 Buick Encore Key Fob or need to program a new one? As a content creator at keyfobx.com and an auto repair specialist, I’m here to guide you through the process. This comprehensive guide provides easy-to-follow instructions for programming your 2015 Buick Encore key fob, whether your vehicle has a regular ignition or a push-button start system. Follow these steps to get your new key fob working seamlessly with your Buick Encore.
Programming Your 2015 Buick Encore Key Fob for Regular Ignition Systems
If your 2015 Buick Encore uses a traditional key ignition, programming a new key fob is a straightforward process that can be done with a working programmed key. Remember, this procedure is for adding keys and will not erase any previously programmed keys. Ensure your new key is properly cut before starting.
- Insert your existing, programmed key into the ignition and start the engine.
- Once the engine is running, turn the ignition key to the “off” position and remove the key.
- Within 10 seconds of removing the original key, insert the new, unprogrammed key into the ignition and turn it to the “on” position (do not start the engine).
- Wait for the security light on your dashboard to turn off. This indicates the key fob has been successfully programmed. If your vehicle is not equipped with a security light, wait for approximately 10 minutes and 45 seconds to ensure proper programming.
- Repeat steps 1 through 4 if you need to program additional 2015 Buick Encore key fobs.
Programming Your 2015 Buick Encore Key Fob for Push Button Ignition Systems
For 2015 Buick Encore models with push-button ignition, the programming procedure varies depending on whether you have a working transmitter (key fob) or not.
If You Have At Least One Working Transmitter
This method is applicable when you have at least one functional 2015 Buick Encore key fob. Ensure all transmitters – both the recognized one and the new ones – are with you and the new key blade is cut before you begin.
- Place your currently recognized (working) transmitter in the cupholder of your 2015 Buick Encore.
- Insert the new, unprogrammed key into the mechanical lock cylinder located on the outside of the driver’s door. Turn the key to the unlock position five times within a 10-second timeframe. The Driver Information Center (DIC) should display the message “Ready For Remote #2, 3, 4, or 5.”
- Place the new transmitter into the transmitter pocket. This pocket is located inside the center console storage compartment, underneath the cupholder. You might need to pull out the cupholder to access the transmitter pocket.
- Press the ignition button. Once the transmitter is successfully learned, the DIC display will indicate it’s ready to program the next transmitter.
- Remove the transmitter from the transmitter pocket and press the unlock button on the key fob.
- To program additional transmitters, repeat steps 3 through 5. Once you have programmed all desired 2015 Buick Encore key fobs, press and hold the ignition button for 5 seconds to exit the programming mode.
If You Don’t Have Any Working Transmitters
If you have lost all your working 2015 Buick Encore key fobs, you’ll need to follow this more time-consuming procedure. This process takes approximately 30 minutes to complete and will program up to five transmitters. Ensure all new transmitters are with you and the key blades are cut. It’s advisable to connect your vehicle to a power source using jumper cables during this procedure, as the car battery voltage may drop.
- Insert the new key into the key lock cylinder on the driver’s door exterior and turn it to the unlock position five times within 10 seconds. The Driver Information Center (DIC) will display “Remote Learn Pending, Please Wait.”
- Wait for 10 minutes until the DIC display changes to “Press Engine Start Button To Learn,” and then press the ignition button. The DIC will again show “Remote Learn Pending, Please Wait.”
- Repeat Step 2 two more times. After the third repetition, any previously known transmitters will no longer function with your vehicle. Remaining transmitters can be relearned in the following steps. The DIC should now display “Ready For Remote #1.”
- Place the new transmitter into the transmitter pocket located inside the center console storage area, beneath the cupholder. You may need to remove the cupholder for access.
- Press the ignition button. When the transmitter is learned successfully, the DIC display will indicate readiness to program the next transmitter.
- Remove the transmitter from the transmitter pocket and press the unlock button.
- To program additional transmitters, repeat steps 4 through 6. After programming all desired 2015 Buick Encore key fobs, press and hold the ignition button for 5 seconds to exit the programming mode.
Important Note: Your 2015 Buick Encore can have a maximum of five transmitters programmed to it. By following these instructions, you can easily program your new 2015 Buick Encore key fob and regain full access to your vehicle’s features.
