It can be incredibly frustrating when your key fob stops working. Suddenly, accessing your 2019 Subaru Outback becomes a hassle. If you’re experiencing issues with your key fob, the most likely culprit is a dead battery. The good news is that 2019 Subaru Outback Key Fob Battery replacement is a straightforward process you can easily handle yourself. While you can always schedule service with us at Keyfobx.com, this guide will walk you through replacing your Subaru key fob battery quickly and efficiently in the comfort of your own home.
Identifying Your Subaru Key Fob Type
Subaru has utilized a few different key fob designs over the years. For your 2019 Subaru Outback, it’s essential to identify the type of key fob you have to ensure you use the correct battery and follow the appropriate steps for replacement. Generally, for 2019 models, you’ll likely have the bulging rectangle shape key fob. However, to be absolutely certain, consult your owner’s manual. This will not only confirm your key fob type but also specify the exact battery needed for your 2019 Subaru Outback key fob battery replacement.
Once you’ve identified your key fob and the correct battery type, you’re ready to proceed with the replacement. Let’s explore the steps for the most common type for your 2019 Subaru Outback.
Step-by-Step Guide: 2019 Subaru Outback Key Fob Battery Replacement (Bulging Rectangle Shape)
This procedure is for the bulging rectangle-shaped key fob commonly associated with the 2019 Subaru Outback and requires a CR2032 battery. These batteries are widely available at most drug stores, supermarkets, and online retailers.
-
Remove the Emergency Key: Locate the small silver tab on the back of your 2019 Subaru Outback key fob. Press and hold this tab to release and remove the metal emergency key. Set the key aside in a safe place.
-
Open the Key Fob Casing: With the emergency key removed, you’ll notice a seam running along the edge of the key fob. This is where you need to gently pry open the casing. You can use your fingernail or a small flathead screwdriver. If using a screwdriver, carefully insert it into the seam and gently twist to separate the two halves of the fob. Avoid applying excessive force to prevent damage to the casing.
-
Locate the Battery: Once the key fob is open, you’ll see the internal components. The flat, round key fob battery will be visible, either on top of or beneath the transmitter circuit board, depending on how the fob opened.
-
Remove and Replace the Old Battery: Carefully release the old CR2032 battery. In some cases, there might be a small clip holding it in place which you’ll need to gently maneuver. Take note of the battery orientation – specifically which side is facing upwards (usually marked with a “+” sign). Now, take your new CR2032 battery and pop it into place, ensuring the correct side is facing upwards, just like the old battery. Try to minimize touching the flat surfaces of the new battery with your fingers; handling it by the edges is recommended to preserve battery life.
-
Reassemble the Key Fob: Carefully align the two halves of the key fob casing and press them firmly back together until they snap securely into place. Ensure there are no gaps along the seam.
-
Re-insert the Emergency Key: Finally, slide the metal emergency key back into its slot until it clicks and locks into position.
Your 2019 Subaru Outback key fob battery replacement is now complete! Test the fob to ensure it’s working correctly by locking and unlocking your vehicle remotely.
Troubleshooting and Further Assistance
In most cases, replacing the battery will resolve key fob issues. However, if you’re still experiencing problems after a 2019 Subaru Outback key fob battery replacement, it could indicate a more complex issue. It’s possible that the key fob itself is faulty or requires reprogramming.
While older Subaru key fobs could sometimes be programmed at home, newer models, including those likely used for the 2019 Subaru Outback, generally require professional programming. For security reasons, key fob programming often needs to be done at a certified dealership or a qualified automotive locksmith.
If you continue to have trouble with your 2019 Subaru Outback key fob after replacing the battery, or if you suspect you need a replacement key fob or programming services, the experts at keyfobx.com are here to assist you. Our experienced technicians can diagnose the issue and provide the necessary solutions. Don’t hesitate to contact us or schedule a service appointment online. We are dedicated to ensuring you have convenient and reliable access to your Subaru vehicle.
