Key fobs are incredibly convenient until they stop working. One of the most common issues with a key fob is a dead battery. Fortunately, changing the battery in your 2020 Chevy Silverado key fob is a simple task you can do yourself in just a few minutes. This guide will walk you through the process step-by-step, ensuring you can get back to using your key fob without any hassle.
What You’ll Need
Before you begin, gather these items:
- A new CR2032 battery: This is the standard battery type for most Chevy Silverado key fobs, including the 2020 model. You can find these batteries at most drugstores, grocery stores, and online retailers.
- A small flathead screwdriver or a thin coin: This tool will help you open the key fob case.
- A soft cloth (optional): To protect the key fob from scratches.
Step-by-Step Guide to Replacing Your Key Fob Battery
-
Locate the Notch to Open the Fob: Turn your Silverado key fob over and look for a small notch or slot. This is usually located on the side or bottom of the fob.
-
Insert Your Tool and Gently Pry: Use your flathead screwdriver or coin and carefully insert it into the notch. Gently twist or pry to separate the two halves of the key fob. If you’re using a screwdriver, wrap the tip with a soft cloth to prevent scratching the plastic.
-
Open the Key Fob Case: Once you’ve pried it open slightly, you should be able to separate the two halves of the key fob casing with your fingers. Set the top half aside, being mindful of the buttons.
-
Identify the Old Battery: Inside the key fob, you’ll see the CR2032 battery. Note the orientation of the battery before removing it – usually, the positive (+) side is facing up.
-
Remove the Old Battery: You can typically remove the battery by gently prying it up with your fingertip or the edge of your screwdriver. Be careful not to damage the surrounding components.
-
Insert the New Battery: Place the new CR2032 battery into the battery compartment, ensuring the positive (+) side is facing up, just like the old battery. Push down gently to make sure it’s securely in place.
-
Reassemble the Key Fob: Carefully align the two halves of the key fob case and press them firmly back together until they snap closed. Ensure there are no gaps and the case is securely sealed.
-
Test Your Key Fob: Press the buttons on your key fob to test if it’s working. The doors should lock and unlock, and the panic button should function correctly. If everything works, you’ve successfully changed your 2020 Silverado key fob battery!
Tips for Key Fob Battery Longevity
- Avoid Extreme Temperatures: Extreme heat or cold can shorten battery life. Try to avoid leaving your key fob in direct sunlight or freezing temperatures for extended periods.
- Keep it Dry: Moisture can also damage your key fob and battery. Protect your key fob from rain and spills.
- Use Quality Batteries: Opt for reputable brands of CR2032 batteries for longer-lasting performance.
- Consider a Spare Battery: Keep a spare CR2032 battery at home or in your glove compartment so you’re always prepared.
Conclusion
Changing the battery in your 2020 Silverado key fob is a straightforward maintenance task that anyone can accomplish. By following these simple steps, you can save time and avoid a trip to the dealership. Keep your key fob working reliably by replacing the battery when needed and following our tips for battery longevity. Now you can confidently handle this common key fob issue and keep your Silverado secure and accessible.
