Nissan Key Fob Programming: Step-by-Step Instructions

As your trusted automotive experts at keyfobx.com, we understand the frustration of a malfunctioning or new key fob. Programming your Nissan key fob yourself can save you time and money. This guide provides comprehensive instructions to help you reprogram your Nissan key fob quickly and efficiently.

Method 1: Standard Nissan Key Fob Programming Procedure

This is the most common method for programming Nissan key fobs. Follow these steps carefully:

1. Ensure All Doors Are Closed and Locked: Begin by getting inside your Nissan and making sure all doors, including the trunk or hatchback, are completely closed. Then, lock all doors using the power lock switch on the driver’s side door.

2. Insert and Remove the Key Rapidly: Take your Nissan key and insert it into the ignition cylinder. Immediately remove the key. Repeat this insertion and removal process more than six times within a 10-second timeframe. It’s crucial to fully withdraw the key from the ignition cylinder each time. You should observe the hazard warning lamps flashing if this step is performed correctly. Note: Avoid rushing this step. The system needs to register each key insertion and removal. If successful, the side marker, tail, license plate lamps, and interior lights will flash twice to confirm entry into programming mode.

3. Turn Ignition to “ACC” Position: Insert the key back into the ignition cylinder and turn the ignition switch to the “ACC” (Accessory) position. Do not start the engine. At this stage, the system is ready to receive the new key fob ID code, and any previously programmed codes are erased.

4. Press a Button on the New Remote: Take your new Nissan key fob and press any button on it once. You should see the hazard warning lamps flash again. Important: Only press the button one time. Pressing it multiple times can disrupt the programming sequence. If successful, the side marker, tail, license plate lamps, and interior lights will flash twice again, indicating successful programming of this key fob.

5. Programming Additional Key Fobs (If Applicable): If you have more than one key fob to program, you will need to repeat a specific sequence for each additional fob. First, release the door lock and then immediately lock the doors again using the power door lock/unlock switch located on the driver’s side power window control panel.

6. Repeat Step 4 for Each Additional Fob: For each additional key fob you want to program, repeat step 4 immediately after step 5.

7. Finalize Programming: Remove the key from the ignition cylinder. Unlock the driver’s side door, open the driver’s side door, and then close the door. This action completes the programming sequence.

Note: You can program up to four key fobs using this procedure. Attempting to program more than four will not work, and older codes might be overwritten.

Troubleshooting: Alternative Nissan Key Fob Programming Methods

If the standard procedure doesn’t work for your Nissan model, try these alternative methods.

Method 2: Alternative Programming Procedure Using Trunk Unlock

This method involves using the trunk unlock feature in the programming sequence.

1. Close and Lock Doors: As with the first method, ensure all doors are closed and locked.

2. Unlock the Trunk via Door Switch: Use the door switch (usually located on the driver’s side door panel) to unlock the trunk.

3. Rapid Key Insertion and Removal: Insert and remove the key from the ignition cylinder six times within 10 seconds. Remember to fully remove the key each time and avoid rushing. The lights should flash twice to indicate programming mode entry. Note: At this point, the system is ready to learn the new ID code, and previous codes are erased.

4. Manually Unlock and Lock Driver’s Door: Manually use the door lock switch (the manual lever on the door itself, not the power switch) to unlock and then lock the driver’s side door.

5. Press Button on New Remote: Press any button on the new key fob once. If you only have one key fob to program, skip the next step.

6. Programming Additional Key Fobs: To program additional key fobs, repeat step 4 and step 5 for each additional remote.

7. End Programming: Programming is now complete. Test your newly programmed key fobs.

Method 3: ID Code Entry Procedure

This procedure is another variation that might be effective for certain Nissan models.

1. Sit in Driver’s Seat, Close and Lock Doors: Get into the driver’s seat, close all doors, and lock all doors using the power lock switch.

2. Insert and Remove Key Rapidly: Insert and remove the key from the ignition cylinder more than six times within 10 seconds. The hazard warning lamps should flash twice to confirm programming mode. Note: Ensure the key is fully withdrawn each time and avoid performing the procedure too quickly.

3. Turn Ignition to “ACC” Position: Insert the key into the ignition and turn it to the “ACC” position.

4. Press Button on Remote: Press any button on the remote controller once. The hazard warning lamps should flash twice again. Note: At this point, the oldest ID code is erased, and the new ID code is entered.

5. Additional Remotes? Decide if you want to program more remotes. A maximum of four ID codes can be programmed. If you don’t want to program more, proceed to step 9.

6. Lock Doors with Driver’s Side Switch: To program another remote, lock all doors using the driver’s side lock/unlock switch (on the power window switch panel).

7. Press Button on Remote (Twice): Press any button on the next remote controller once (the instructions in the original text say “twice on remote controller once” which seems like a typo and likely means “once on the remote controller”). The hazard warning lamps should flash twice. Note: The oldest ID code is erased, and the new ID code is entered.

8. More Remotes? If you have more remotes to program, unlock the doors and repeat steps 6 and 7.

9. Complete and Test: Once you have programmed all desired key fobs, open the driver’s side door. Check the operation of all programmed remotes to ensure they are working correctly.

By following these Nissan Key Fob Programming Instructions from keyfobx.com, you should be able to program your key fob successfully. If you encounter issues or these methods do not work for your specific Nissan model, we recommend consulting your vehicle’s owner’s manual or contacting a professional locksmith or Nissan dealership for assistance.